Questions & Answers for: garmin etrex legend lines screen

Garmin etrex legend etrex legend shuts down leaving a thin vertical line on the screen. batteries are good. unit will not turn back on unless battery is removed and reinstalled. I had this problem ...

...Sound is OK but screen is unreadable I have garmin e-trex Legend and it was just working fine then the next time i turned it on the screen is unclear with lines thru all the writing. Please

ETrex Legend display screen goes blank and just a line from top to bottom appears. help please Due to a new satellite launched this year, the WAAS is affected. Disable the WAAS, go to Garmin and ...

...eTrex Legend on, it powers up fine and acquires the satellites. However, all of a sudden the screen goes blank and there is a thin black line on the right hand side of the screen. Any help would be ...

...Etrex Venture. Never dropped. Minnesota climate. Used for hunting. Good and clean contacts for batteries. Batteries new. Unit will shut off while in use. Screen will fade out partially and verticle ...

...Garmin for the flat rate repair fee of $79 dollars. I would recommend getting the new eTrex Legend H with the high sensitivity receiver if you want a similar model. It's sat reception will blow the ...

...the same problem on one of 20 etrex legends. I just downloaded the update from the Garmin website and it seems to be doing the trick. Time will tell. It is worth trying and only takes a few

...Garmin eTrex Legends, and both have done this -- one after about 10 minutes of being one (almost like clockwork), the other only does it rarely. Exactly as original poster said, you can do nothing ...

...Garmin Etrex Legend starts up and finds the satellites, but then screen goes blank except for vertical line on the screen.Stays that way until batteries wear out. Fixable? I have the same Garmin ...

...Garmin Etrex Legend's joystick works intermitently. And you never know how it will work. Sometimes it works left/right but not up down. Sometime left/right and up/down but will not select when pushed ...