Questions & Answers for: fuel mixture poulan wild thing

Fuel Mixture for a Poulan Wild Thing What is the proper fuel mixture for a Poulan Wild Thing? as far as i know it is 1:40, or 3.2 ounce Oil to 1 Gallon unleaded regular fuel

...later. Then runs 10 minutes & cuts off Plan your beer breaks every 10 minutes and enjoy the time off. Also check your fuel mix, the engine is running hot, replace fuel mixture with proper oil

...Thank You Roger I have a manual for that saw that says the mix is 40:1- 3.2 oz. of oil to 1 gal of gas . Mix the fuel/oil ratio50:1,the amounts to get that mixture are on the back of the oil

mixture for the poulan wild thing chain saw please? Use a quality 2-cycle air-cooled engine oil. Poulan recommends a good quality 2-cycle air-cooled oil designed to be mixed at a ratio of 40:1 (A 40:1

...mixture is 50-1 or 2.8 ounces per gallon of gas... heatman101 3.2 ounce container of synthetic 2-cycle engine oil to 1 gallon of fuel. This is a 40:1 ratio. Read more: How to Fuel a Poulan Wild Thing ...

...mixture is 40:1.. NOT 50:1. 50:1 is the fuel to oil ratio. Be sure to use fresh gas, a modern synthetic chainsaw oil, and mix in it's own container. Be sure to shake the container thoroughly just ...

...fuel hose up to the carb for signs of fuel leakage, replace if reqired, if the carb has standard adjuster screws, increase the H screw by 1/4 turn out ( anto clockwise ) this will richen the

...fuel mixture from idle to half throttle, the H screw will adjust the fuel mixture from half throttle to maximum throttle, this will also control the maximum revs, the T screw is the tick over or idle ...

already done replace the fuel filter in the tank, it is obviously fuel starvation, if no better increase the the fuel mixture on the H and L screws ( turn anti clockwise 1/4 turn on each to start with

how do i adjust the fuel mixture For two cycle and four cycle engines is 50:1.