Questions & Answers for: electric sander stopped working

Question about 5" Disc Sander GV5000

1 Answer

...sander and it worked for a few seconds then stopped. I had tripped a breaker. After switching the breaker back on the sander still would not work. I have tried the sander in other outlets in the barn ...

Ad

Question about 3107DVS Electric Sanders & Polishers

1 Answer

...sander stopped working. At first it seemed like it was shorting out, and by turning the speed adjustment sometimes it started working again. Eventually it completely stopped. Took it to a tool shop ...

Ad

...drives the belt. The drum motor works fine but the belt stopped working entirely. Thanks what model if it is older electric motor repair shop will either have or can get it make and model #

Question about 5318-21 1-1/2" Spline Rotary Hammer w/ Case

1 Answer

...stopped in mid drill. squeeze the trigger, nothing happens. any ideas? It could be a dirty switch connection in the trigger assembly , it happens to me on my electric sanders all the time , just open ...

Question about 5318-21 1-1/2" Spline Rotary Hammer w/ Case

1 Answer

...stopped. It appears no power is going to the dryer. Try resetting the dual breakers in the house electrical panel--push off, then on. If works, ok. If the breakers trip again, look for a shorted ...

Question about Ridgid/One World Technologies Inc 6"VS Dual Orbit Random Sander

1 Answer

...electric motor. The sander is designed with a fan physically attached to the motor to assist in blowing out dust residue either into the dust bag or into a dust vac. Although adapters are sold to ...

Question about Ridgid/One World Technologies Inc 6"VS Dual Orbit Random Sander

2 Answers

...off your sawdust catcher and see if there is a build up inside. If so you will need to use some electrical wire to work out the accumulation and then blow it out with your air

Question about BR318 3" x 18" Belt Sander

1 Answer

...electric sander suddenly stopped working. I was using it, I stopped to readjust, and the next time I pushed the button nothing happened. Is there a safety switch or something that I could have ...

Question about 571794 ETS 150/5 EQ 6-in Random Orbit Sander in T-Loc Systainer

1 Answer

sander has suddenly omitted a puff of smoke from the top and has stopped working If you have shorting again by trying replace the capacitor but if it is not working try to turn a little the fan insite

Question about 571794 ETS 150/5 EQ 6-in Random Orbit Sander in T-Loc Systainer

1 Answer

...electric device properly and carefully. But, when you are using a disc sander, you should be more careful as you will have several things to worry about. Your safety, the quality of work, and the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Tools & Hardware - Others Experts

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66967 Answers

Are you a Tools & Hardware - Others Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...