Questions & Answers for: dryer plug sparks push start

Question about 62602 Electric Dryer

1 Answer

PLUG THE DRYER BACK IN. SET THE TIMER AND CLOSE THE DOOR. IF IT DOESN'T START UP OR BUZZ, UNPLUG THE DRYER AND REATTACH THE WIRE. PLUG THE DRYER BACK IN AND SEE IF IT STARTS BY ITSELF. IF IT DOES, THE

Ad

...push the button to start the dryer, it makes the same noise as when you forget to set the timer and then push the start button, but nothing happens. The door is shut and the dryer is plugged in. It ...

Ad

Question about LER4634J Electric Dryer

1 Answer

plug. everything looked ok and it started right up. i turned off the breaker and pushed the dryer back and turned it back on and it and made sure the wiring in the back was ok then i noticed it wasn't

Question about LER4634J Electric Dryer

1 Answer

...dryer! Then, remove the front panel screws (if any), and gently pry it off of the cabinet, door and all. The panel is usually retained by steel clips. Next, check for foreign objects that may be ...

Question about 158cc Push Lawn Mower #11a 034f200

1 Answer

...as neccesary 5. Apply warm air to engine block via hair dryer at the spark plug for 5 minutes and attempt to restart 6. If that doesn't work allow the mower to "rest" for 30 minutes and repeat step

Question about 158cc Push Lawn Mower #11a 034f200

2 Answers

...dryer that goes across it. A metal strip panel where the timer is at the top. Unplug the unit. The button you push that starts it will be there also. This start button may be at fault. If you are ...

Question about Profile Harmony DPGT750EC Electric Dryer

2 Answers

...dryer makes a popping sound and sparks come from the lower back of the dryer That doesn't sounds quite right. The first thing to do is stop using the dryer. Unplug the dryer. This is a serious issue. ...

Question about Profile Harmony DPGT750EC Electric Dryer

1 Answer

...dryer. I replaced the heating element since my wife noticed there wasn't heat anymore. Upon removing the old element there was visual evidence of a break. After i replaced the element and pushed the ...

...dryer saw sparks...noticed the burn area near the grounding ... I could hear a click til around the 8th turn then tried it and it worked. ... My dryer doesn't initially turn on when I push thestart ...

Question about Profile Harmony DPGT750EC Electric Dryer

1 Answer

...dryer and dry out all that you got wet under hood, PCM, all fuse boxes. all spark plugs ,coil packs and HV wires if present, 5.9Lgas not 5.9Diesel , for sure, v8 , 8 spark plugs this is a Distributor ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Dryers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...