Question about Round Head Framing Nailer D51845
Once trigger is depressed, air leaks and no nail is fired.... Once i connect the air hose, and want to fire a nail air blows out of the trigger well, and does not fire a nail ( at all ). But it does ...
Question about Round Head Framing Nailer D51845
Dewalt 51488. Air leaks around trigger and won't fire nail. I have a Dewalt 51488. When i attach the air hose the gun does not leak... but when i depress the trigger air leaks out and does not fire a ...
Question about Round Head Framing Nailer D51845
...dewalt framing nail gun was hooked to the air compressor, but was not being used when it began leaking air which you could hear and got louder. It sounded like it was leaking around the trigger area. ...
Question about Round Head Framing Nailer D51845
as soon as air hose is connected the firing rod extends, stayes extended, and air continues to come out the vent holes at the top of the gun. this problem started after i replaced all the o-rings and ...
Question about Round Head Framing Nailer D51845
...ring with 4 upright tabs). See parts list at www.toolpartsdirect.com. To remove cylinder carefully pull /pry up bulkhead. Air leaking from nose is caused by debris/ worn orings in gun where bulkhead ...
ring needs to be lubricated but I do not know for sure. Any help would sure be appreciated. Piston oring will not cause gun to leak. Most likely the orings between the cylinder and cylinder spacer and
Question about Round Head Framing Nailer D51845
...air on my D51844 it starts firing nail out i have not touch the trigger what is the problem danger Dewalt uses a combination buna and vinyl orings. The vinyl orings in their nailers fail by turning ...
Usually answered in minutes!
191 Questions
163 Questions
151 Questions
96 Questions