Questions & Answers for: black plastic falling door dishwasher

...black plastic peice near the top of the assembly, and grabbing a small "arm" on the side of the cam. When you close the cover, a metal U shaped clip catches the cam and puts tension on the spring. At ...

...black plastic On/Off button comes all the back up into cutout in the top of the door, you must remove the front of the door (10 little screws; two shims will probably fall out; good luck figuring out ...

...plastic cap should slide or pop off. The instructions for the new cap should instruct you how to slide or pop it back into place. A new cap may solve the problem if the cap is not opening during use. ...

...black seal will most likely stretch out and not fit back into the channel that it came out of, you can either buy a replacement seal or do what i did and cut the excess and re-attach it using hi-temp ...

...black heavy plastic, waxy substance have fallen off the bottom (outside) of the machine. Not quite sure what it might be or if is a factor. When you perform the key dance of normal heat dry normal ...