Fixed up my 360 and trying to work out the bugs. Hey guys, I did some performance mods to my motor. I put an Edelbrock High-rise (non-EGR) manifold & 600cfm carb, shorty headers & Flowmaster, etc... I
...steel tubing and what looks like a filter located on top of the engine just back from the main fan belt. It looks like fuel is seeping, fast from the seam of the steel tubing and the filter thing or ...
...steel tubing and what looks like a filter located on top of the engine just back from the main fan belt. It looks like fuel is seeping, fast from the seam of the steel tubing and the filter thing or ...
...that are involved with this and make sure that there is no shorts is the wiring and also check the belt and make sure that it is tight and see if there is a master fuse for the charging system under ...
1980 Jeep Wagoneer overheating Just bought a 1980 Jeep Wagoneer with snowplow. On the way home it overheated pretty bad. (Temp gauge obviously doesn't work) Belts are fine and fan is turning. top and ...
I am trying to install serpentine belt and can't remember how. I need a diagram please. You have not indicated the engine accessories installed (ac, ps, pb, etc.) CLICK HERE for all the diagrams. ...
I have a 1988 jeep grand wagoneer, in the last six months i tore a apart the front side of the motor, replaced timing chain, starter, starter relay,ignition switch, all belts and vacume lines, and ...
installing belts on 1988 jeep wagoneer I'm assuming your question deals with how to route the belt... There is usually a belt routing diagram near the radiator...
...jeep laredo. It has a squealing noise coming from the front of the engine. I thought it was the belt, put belt dressing on but it only stopped the noise for maybe a minute. I thought it may be
Usually answered in minutes!
50 Questions
27 Questions
3 Questions
50 Questions
23 Questions