Questions & Answers for: Jeep Liberty bad wire

Question about 2006 Liberty

1 Answer

...test light to a good ground and hold point on small wire on starter it should light up if it does your starter is bad ,if it doesnt light up check ignition switch on steering colum ,most likely ...

Ad

Question about 2005 Liberty

1 Answer

...wire is bad. Step 2 Check the small wire on the solenoid for power when the key is in the start position. Remove the small wire on the solenoid and have a helper hold the key in the start position. ...

Ad

o 02 jeep liberty oil pressure light stays on A couple of things could be wrong a bad oil pressure sensor, a short in the sensor wiring,low idle oil pressure. Checking this is simple on some models. ...

...to body and clean, Test the 12 volt wire to make sure it has 12 volts. If not bad switch or bad wire or contact in the connector. Wiggle the connector first with the lights on to see if it

Question about 2002 Liberty

1 Answer

when taking off of stopping the 2005 jeep liberty 4x4 diesel kicks (jerks) badly...I got a computer thing that told me it was a p0700 error, trans control system malfunction....is this something that ...

Question about 2006 Liberty

1 Answer

#39;s about a day later the engine started to idle rough and now the check engine is on Sounds like bad plug wires, and/or one or more wires may not have been clipped back on all the way and came off.

Question about 2007 Liberty

1 Answer

brake lights won't work but all other lights work 1: bad fuse. 2: bad brake lamp switch, if both are dead. 3: bad lamps. 4 bad wires to above. using a voltmeter finds this easy, got one? or do you ...

Question about 2006 Liberty

2 Answers

...bad PCM) if tool-less? start with cheap parts , work to expensive. (guessing) now wasted spark 101. if one line opens , both spark plugs die. no spark the wasted spark is wired in SERIES. ( like ...

...BAD I agree with Bill. My guess is the ignition switch or the wiring going to it Does your vehicle have a remote start? Its possible that the remote start is malfunctioning. I had a vehicle with ...

...blown a cheap part. it can only be 3 things, and a $10 voltmeter tells you which it is in 5min work bad switch 0v out bad resistor 12v in, 0v out. or bad wiring. (0v out) the drawings are on ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2002 Jeep Liberty
2002 Jeep Liberty

1,658 Questions

2005 Jeep Liberty
2005 Jeep Liberty

839 Questions

2003 Jeep Liberty
2003 Jeep Liberty

768 Questions

2004 Jeep Liberty
2004 Jeep Liberty

735 Questions

2006 Jeep Liberty
2006 Jeep Liberty

633 Questions

Manuals & User Guides

Loading...