Questions & Answers for: adjusting toro zero turn mowers

Toro Zero Turn adjustment I have replaced my blades on my Toro Z4200 and cannot get the deck leveled. It leaves a strip of about 1/2 in tall grass. I measure the way the instruction manual says. I do ...

...toro zero turn model 74350 which i purchased in 2003. Recently it started turning over really hard. I had to replace the starter. How do i adjust the valves, ie: specs. Is their a decompressor and if ...

...toro zero turn) steering handles to enable smooth operation? While going forward attempting to stay straight the mower has a tendency to try and (jerking) go left. The mower jerks when turning left. ...

I have a toro MX 4260. The mower pulls to the right when i full engage each motion control lever. Is this normal? The tire pressure is perfect and not the cause of the pulling. there should be handle ...

toro z420 the right drive transmission doesnt turn as fast as the left side but still cuts grass you have to adjust your tracking. Your manual tells you how to do this

adjusting the HYD drive system Manuals and details are listed on the Toro website https://lookup3.toro.com/request/request.cfm?lang=uk_en

Toro zero turn mower. It did fine at first, but now, won't make the sharp, 180 degree turns. In each direction, it makes wide turns while trying to make sharp turns. Any ideas? I would check the fluid

...Toro SW5000 zero turn will not turn : The right rear wheel does not turn properly thus not allowing it to drive straight or turn to the left. make sure your tires are at proper pressure first. then ...

...toro 5060 timecutter zero turn mower the control handles are not positioned equally. One is forward about two to three inches, how do I adjust them please! should be two bolts on the handle that you ...

...Toro zero turn. My steering handles are a little loose and hit and/or overlap in the middle. How do I adjust this? I found instruction for lowering and raising but nothing more. Hi Bonnie- I found ...