Questions & Answers for: adjust drive belt tension toro

drive belt not engaging. need more tension on drive belt not engaging. need more tension on belt I think does the lever feel spongy when you try to engage it(not solid as it felt new)? usually this is

...drive belt would slip,made it a little better by putting on new belt w/belt dressing,but would still do it especially under load or up hill,or starting in higher gear. Unfortanately,it was one of ...

...drive unit.Determine which screwdriver or torx bit is needed to remove shroud and remove it. After removal you will see a pulley with belt around it, as you pull the handle back to engage self propel ...

drive belt slipping, not propelling mower Adjust belt tension or replace belt with new or slightly shorter one Phillip

i have a toro lx500 riding mower. the blades won't engage. Check the belt on top of the mower deck. Make sure the belt didn't slip off or break.

Toro LH 500 drive belt replacement. not deck belt replacement Main drive belt needs replacing How to Replace Drive Belt in Toro LX500 Lawn Tractor eHow

how do you replace the drive belt on a time cutter z5000 model no 74370 Release tensioner adjuster fit new belt and readjust,could have slide slots holding the rear axle also(adjustment.)

...Toro LX500? what type of oil do I use in my mower? It is a Toro LX500 In the northern US, I would use a 5W - 30 year round, or 30 in the summertime. Do not use "non-detergent". In the southern US, I ...

...belt. How do i remove engine drive pulley from crankshaft? Toro LX500 Riding Mower Try taping it lightly with a hammer it has probably never been removed. Cut the old belt off it will save time.u ...

my Toro LX500 mower keeps moving even after I take my foot off the pedal. and a clanging noise is coming from the rear end Adjust the clutch cable.