Yes I bought a Firefly lighted keyboard, yesterday i turned my computer on and everything worked find, went to the kitchen for a few minutes and came back and the lighted keyboard was not lite and won't light up, what can be wrong. I unplugged it from the back of the computer and plugged it back in the pc, turn the pc off and restarted it, but still no lite on the keyboard, is there a fuse or a major problem with this keyboard.

keyboard should have pair button upper right press (manual should show info on how to pair) typical hold pair button for few sec light blinks
Scan for the device on the tablet (Via Bluetooth settings )and then select "pair" keyboard --Connected

Check you breakers, as the oven should be on its on set.

first is there anti freeze in the radiator. How hot did it get? you can have a stuck thermostat or a bad water pump,and or a hole in one of the coolant hose. check and see if the radiator is full,if it is not add water,and start the car,and wait. about 5 minutes see if the upper radiator is soft when squeezed if it is then thermostat is ok ,but if it is hard to squeeze you have a stuck thermostat. if the that is ok . you may have a bad water pump or even a radiator fan not working

try to tighten the cord connecting your keyboard to the monitor, if it was not loosen, then your keyboard already reaches his life span because keyboards are disposable same with the mouse.

what windows system are you supporting because i just had the same problem? but i am using the keyboard now and it works perfectly after a un-installed the program

There are a few options, but yes you need some kind of basic plan. They do have a "pay as you go" service where you just pay for minutes used, no monthly fees or anything like that.

Here is a list of their different plans:

http://www.fireflymobile.com/plans_and_services/

vwhat is vijay maruti bomble (civil engineer) mobile no.

It turned out that the little metal spring that holds the batteries in was bent. It was so slight, you couldn't even tell, but the batteries weren't actually touching. So I just bent the spring back into shape, and now it works perfectly fine.

http://forum.doityourself.com/showthread.php?t=57564

Hi,
I found this website which maybe useful to you..

Cheers :o)
D