Anyone have a service manual for a Vizio P50HDTV20A?

After a minute of working?

You'd probably need this:
http://www.ebay.com/itm/REPAIR-SERVICE-FOR-YPSU-J013A-EAX32241201-POWER-BOARD-SANYO-DP50747-AND-OTHERS-/110797466087?pt=US_TV_Boards_Parts_Components&hash=item19cc0b29e7

Make sure it's the same board, though!

ry changing the input device to something you are sure, works such as a DVD player.

Switch off TV manually, switch off power, remove plug and retry after 48 hours.

If problem persists, please refer it to a qualified service technician.

According to forum posts, it sounds like you may have a blown fuse. Your manual may tell you how to replace these fuses. You should be able to get replacements at Radio Shack. The fuses have different values, so remember which value goes where. For more information, search google for: p50hdtv20a fuse

Hi the picture on a plasma TV is controlled by the Zustain board. You have a bad Zustain board. Their are two on your TV so you have to figure out which one is bad to order it. Most of the TV the bad one will have a bad fuse or it will not heat up like the otherone. You can always replace them both also. you can get parts fro this TV at www.interliquidparts.com

Hi.

Please click on the link below to access the service manual:

Vizio P50 HDM (P50 HDTV20A) Plasma TV Service Manual

Regards.

Ginko

x board or matrix? board 1st kontroled the cables

Check ur power source with other devices?Yes.Than,the power supply board it dead.That the board,where the power a/c cord plug into it.Try website like Ebay.com to buy a refurbish power supply board for the replacement.

http://manualsforall.com/vizio/vizio-tv-manuals.html

sounds like tv shop knows that is missing because they removed it so as not to work when custermer got it back with no charge

Probably power supply, call Vizio for slow service