My remote # is urc-1030b04 and I'm trying to find

Codes for PANASONIC: 0171 0148 0054 0170 0062 0374 0381 0437 0950 0003 0070

Hi,

Thanks for asking FixYa for help. My name is Jeff and I will be assisting you today. You can find the manual download with codes here.

http://www.hifi-remote.com/manuals/manual.shtml?URC-3300

If none of the codes work you can try the code search by following the directions

If you are in need of additional help, please let us know.

Thank you for allowing us to help you today. Don't forget to vote. 4 thumbs up please.

Which of the many Philips universal remotes do you have? http://www.urc.philips.com/ lists them all. Then use the remote code finder to look up Philco. For example, the code 2192 is the Philco code for the SRP 4004.

However, the codes built into the remote may not work if the remote is older than the TV (or was programmed within 6 months of the TV's release). There is a time lag for codes going from the manufacturer to the universal remote makers.

I hope this helps.

Cindy Wells

I can help you with your URC-1030 Universal Remote Control issues.

The URC-1030 codes for Sharp TVs are: 0093, 0165, & 0688.

For complete instructions on entering the URC-1030 remote codes, please refer to my posted Fixya Tip One For All URC-1030 Code Entry.

I hope that helps.
_______________________________________________
One For All URC-1030 Manual
One For All URC-1030 Code List
One For All URC-1030 Code Entry
One For All URC-1030 Code Search
One For All URC-1030 Reassign Key

The One For All URC-1030 Manual and Code List are available here.

For complete instructions on entering the URC-1030 remote codes, please refer to my posted Fixya Tip One For All URC-1030 Code Entry.

I hope that helps.
_______________________________________________
One For All URC-1030 Manual
One For All URC-1030 Code List
One For All URC-1030 Code Entry
One For All URC-1030 Code Search
One For All URC-1030 Reassign Key

On most universal remote control, you will find the procedure to enter the builder code OR a procedure to pass through all the code of the remote, one by one and pass to the other TILL you find the right one. It happen to me numbers, a bit upsetting procedure but you'll find out...

I determined that the Philco Remote Control that I wanted to program for use on a Magnavox tv was too old (20+ Years) and dead. It also did not have the features of a new Universal Remote. So, I tosed the Philco remote and purchased a new Universal Remote Control.

Thanke you..

I have a Silvania TV and need the programming codes for the PHILCO Remote urc 2070

Thank you for your help.

Asked someone else who knew the three numbers to program my tv.
FOR FREE!

http://www.remote-codes.com