I can't figure this out...

How funny is the noise?

The macro mode is for taking close-up pictures. In this mode the flash will not work. There's a slide switch on the end of the camera, near the USB jack. Slide the switch away from the flower and toward the mountain.

If you have the camera set to use its 9-point focussing system, it's possible the camera is picking out what it thinks is the most important part of the picture and it's different than your opinion. Set it for single-point focussing and you'll be much happier.

Digital cameras are famously demanding on batteries. You must use good alkaline batteries or better, a set of high capacity NiMH recharegables. Zinc or "long life" batteries just aren't up to the task.

New rechargeable batteries are supplied only partially charged. You need to charge them fully before use.

I don't understand your description of the problem with the SD card. When you take pictures they will automatically be stored on the memory card. Are you saying there are other pictures there already?

I would suggest the first thing do is to replace the batteries with new ones. It sounds as though the batteries are low (perhaps they won't charge fully anymore) and that is why your camera is switching off.

It is always worth trying the simple things first :)

If this doesn't work and your camera still won't switch on please post back.

theres a garbage icon on the right side of options when you are in the pictures...just press it...yes...and its deleted

This is a problem on the motherboard, sort of like a solenoid that controls the functions of on/off mode and video still mode. it needs a service and possibley a patrt replaced Hope its unjder warranty as it expesnive

Memory cards are funny things that can sometimes currupt for various reasons i suggest you just buy a new memory card.
Try to retrieve the pictures you can get on your computer before you dispose of the old one.

Good luck

i do not understand -/+ button and reading tell me in the simple language.My question is in white colour bird feathers are always very bight i can not see the detail in it how i cam solve this problem if i increase the shutter and apperture the picture became dark.

If your video looks good on a monitor then more then likely your ES3012-5MLZ30PW is good....I would try taking the video from that camera to a different input on the recoding device to see if the problem follows....If you don’t have a different input try a different camera and record for 5 min and then playback to see if dose the same thing.....You can also take the video feed from the ES3012-5MLZ30PW to a different recorder and see if the problem follows....good luck and let me know if this helps.....you can always call Pelco at 1-800-289-9100 they do their tech support 24/7 365.....they really set the standard in tech support....

cbinny1