I ve installed it but when i strt,a black screen appears

AKB circuit, Automatic Kine Bias circuit.The normal voltage from G2 at CRT pin are suppose to be 4k up to 5k DC volts. turning the Flyback " SCREEN" trimmer slightly curing that video problem.

Hi Tony

You`ve mentioned that ON CERTAIN CHANNELS THE TV WORKS FINE, so your trying to say that not all channels THE BLACK SQUARE APPEARS IN THE MIDDLE O THE SCREEN... my be that black square is generated from the broadcast center. may be your unit is good. let me ask you how many channels that your tv works fine..?

What is the error message? The CPUs will not overclock on there own, that requires configuration. Some components when not installed properly with cause the computer to boot to a black screen and the fan to speed up dramatically. I've seen memory sticks and display port cables cause this. Check all your hardware and make sure everything is seated properly.

You probably need to install a display driver for this monitor on your netbook. http://us.aoc.com/monitor_displays/e950swn

I had the same issue and resolved it by downloading the World war 3 black gold 1.2 Patch - install this and you should be fine. I will still ask you to select a resolution but it will actually let you now.

I got mine from here
http://www.shacknews.com/file/454/world-war-iii-black-gold-12-patch

try this strt the pc when you see setup on screen press F8 key a few times then you will see options like safe mode and safe mode with networking and you will see an option to boot from last known good configuration use keyboard arrows to select this option your pc will reboot if this doesnt sort it the repeat these steps and on the screen select safe mode and hit enter key or return key let the files load on the screen when th pc goes into safe mode the screen will look different clik on strt then select alll programmes then select accessories then select system tools then select system restore ....select a date when your pc was last working correctly and clik next let the computer do its work when it restarts it should be working correctly (NOTE) any progrmms you downloaded from the date you selected will be eresed but not your documents or downloads like movies ...hope this helps

Black screen encountered is due to data corruption. You cant ry booting in other boot options like safe mode by hitting F8 during strt up and select safe mode. If it works on safe mode try doing a system restore to revert it to an earlier date and time when it worked. If Everything else fails, what you need to do is to re-install your Operating System from the recovery disc provided by your manufacturer or reload the factory defaults.

it shows but the cartridge will print till the end.do not worry it will work properly.

Uh yah, I don`t think I`ve ever heard of that.

video driver maby what about redoing windows formatt it all