Leakage Hi Our Hamilton Beach 908 Jars all have begin to leak. We are based in India and our supplier has thrown up his hands regarding replacement parts. Can you suggest someone who would help us with service support in India please? Thanks Best regards Anu Hasan

Try "Amazon" or "e-bay" on your computer.

tighten the base or make sure the rubber gasket is in there

try this link.. manual for the hamilton beach blender 54229 Google Search

You may be able to order a replacement part online from this website:

http://www.abtecparts.com/hamilton_beach_blender_52644C.htm

Thank you for using FixYa!

Hi,
Disassemble the base from the jar, and check the placement of the gasket. Reassembly, with the jar upside down is gasket, blades, then base. While disassembled, rotate the blades by hand just to make sure that they aren't in a bind. Replace if defective.

--W/D--

web search-hamilton beach 54200 parts-click on appropiate site

You need a screwdriver and soft hummer. Secure the screwdriver on one teeth of the cluch and lower the screwdriver to have un angle of around 60 degrees. Now you hit a little fast the scredriver with the hummer in order to unlock and unscrew the clutch. Then it will be easy to unscrew with your fingers. This is a litle bit triky so you may need to try some times in order achieve it.
Please remeber that you it unscrew reverse than it rotates.
The new one need only to screw in place and it will lock by itself as soon as you will use the blender.
Good Luck

check with abtec.com. They seem to have parts for the Hamilton Beach model 50754 blender but I seem to remember the blade and base come as one unit.

Contact the manufacturer. Have model # and serial # ready. They may send you one for free.
Otherwise it's off to Radio Shack

twist is as u take it off