Driver APG ATi1650 Pro - ATI RADEON X1650 Graphic Card

You may download the manual from here.

https://aberdeen.armymwr.com/programs/hunting

If you just need to get in the drawer until you can figure out why the button is not working there is a small tab on the bottom of the register. push it and it will release the drawer manually.

Your card uses apg x4 that is the way it is plugged in to you motherboard, inside your computer, apg x4 is very rare these days and if you looking for a replacement you should find a card that supports apg x4.

When you turn on your pc press F10/F2 (depends upon the motherboard manufacaturer) to go to system setup, function will be according to the motherborad, check for an option named APG/APG Memory/Video Memory. and replace its value using up n down keys or page up/page down or +/- keys. and choose 512 value and maximum value is 256 or less than 256, your motherboard does not support the video memory more than it is selected.

Hi Brian!

Your Shuttle supports APG cards, ther is one APG 4x slot on that mobo.

Here is the spec for your mobo:
http://eu.shuttle.com/archive/en/mv42n.htm

Good luck to you

Please take a moment and rate my answer

Nic

http://support.dell.com/support/edocs/systems/dim4550/techov.htm#1101565
The documantaions say thar you have an APG-port, i cant see any problem why you couldent upgrade it...if u can find a card.

Good luck

I would go to this page on the ATI website and select the details for your operating system and your graphics card.
You can then download the drivers.
http://ati.amd.com/support/driver.html

Hope this helps

Well if the card you bought is an PCI-express card and the port on your motherboad is an APG....you cant use it!

*if there any soundcard is present in ur motherboard replace it and install the driver of it by putting it the writer