Question about Apple MacBook Air

1 Answer

When turn on MacBook air the screen is blue.I can't get into any icons.

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 109 Answers

Try to reset your SMC (System Management Controller) p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px Helvetica; color: #1a1a18}
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 10.0px Helvetica; color: #1a1a18} span.Apple-tab-span {white-space:pre}

1. If computer is on, turn it off by choosing Shut Down from the Apple menu.


2. Connect power adapter to computer and to a working power source.


3. On built-in keyboard, press (left-side) Shift-Control-Option along with power button just once. Important: Use Shift-Control-Option keys on left side of keyboard.

Note: When the LED on the MagSafe connector is orange/amber, resetting the SMC will change it to green for a few seconds, indicating that SMC was correctly reset.


4. Wait 5 seconds and press power button to start computer.


If it starts without beeping errors reset the PRAM (Parameter RAM)


p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 10.0px Helvetica; color: #1a1a18} span.Apple-tab-span {white-space:pre}

1. If computer is on, turn it off by choosing Shut Down from Apple menu.


2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in Step


4. Note: If keyboard does not have an Option key, use Alt key instead.


3. Press power button.


4. Immediately press and hold Command-Option-P-R keys.

Important: You must press this key combination before the gray screen appears.


5. Hold down keys until computer restarts, and you hear startup chime a second time.


6. Release keys.



p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px Helvetica; color: #1a1a18}

Posted on Mar 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to delete a app on a macbook air 13.3 inch


The easiest way is to
  1. Switch to the Finder App (The blue smily face on the Dock)
  2. Cmd-Shift-A to bring up the Applications Folder
  3. Ctrl-click the app you wish to delete and choose "Move to Trash" or drag the app icon to the trashcan on the Dock. If the app is in a folder there may also be an uninstall icon in it which you will use instead of deleting manually.
  4. If requested enter you admin password and press the Okay button
  5. the Mac OS will do the rest.

Mar 01, 2015 | Apple 13.3 MacBook Air 1.6GHz 2GB RAM...

1 Answer

Macbook Pro Black Screen but Keyboard LED On


If you've already tried turning up the brightness of the screen (the "sun" icon), then you may have a problem with the backlight (possibly burnt out, in which case you'd need a new backlight bulb). See this post for more details:
How do fix my Macbook dark screen

May 13, 2014 | Apple MacBook Pro Notebook

3 Answers

How do i change screen resolution and text size on Macbook Air 10.9.2?


Go to: System Preferences>Displays> Click on "Display" Tab, click on "Scaled" and they change the res.

Apr 29, 2014 | Apple MacBook Air

2 Answers

I just lost the menu bar at the top of my Macbook Air- how do I make it active again?


Try and start your Mac in safe mode.

To do this, as soon as you power on your Mac hold the shift key until the screen turns black and text starts scrolling down the screen.
The Mac will check itself and then boot up (wait for it, it will take a few minutes.)

Go from here...

Oct 01, 2012 | Apple MacBook Air

1 Answer

I have a new Macbook Air. It was working fine till yesterday. Today when i switched it ON, it is not booting. There is a blue screen and that is it...


Turn it on and let it boot as far as it can. Insert the system DVD that came with the machine. Hold down the "C" key and reboot (this will force it to boot from the optical drive - i.e., the DVD/CD). You should then come to the setup screen. From there, re-install the operating system.

Apr 21, 2011 | Apple MacBook Air

1 Answer

Hanging blue screen on 13-inch MacBook


The issue is with the software.Boot the system with installation media and go to disk utility and repair the file permission.This can solv the issue.If still the issue persist.Then go ahed and format the drive and re install the software

Mar 07, 2010 | Apple 13-inch MacBook - Intel 2.0GHz Intel...

1 Answer

I have this apple mac notebook and i completely forgot the pass word i cant even get to the start up menu


I assume you have the original Apple installation DVD that came with the Macbook.
Insert the DVD as the mac starts up and immediately hold down the alt key. After a moment or two you will get a blue screen with three icons and a rotating pizza. Wait until the pizza stops spinning and you should get a fourth icon for the DVD. If it didn't work, press the circular arrow - it means restart - and hold down the alt key again. Don't let go until the blue screen appears.
Once the DVD icon appears, click on it so that it turns black then press the arrow that points to the right. The computer will now start up from the DVD.
It is now going to start up as if there is no operating system on the computer and it assumes you are going to install a new system from the DVD. You obviously don't want to do that so what you must next do is look at the menus that have appeared at the top of the screen.
One of them is 'reset Password" or something similar.
Follow it through AND WRITE IT DOWN SOMEWHERE, don't rely on memory.
Then quit the installer and let the computer restart normally.
That should be it.

Jan 13, 2010 | Apple MacBook Pro Laptop Computer with...

1 Answer

Wont turn on


Hello, It looks like a dead hard drive... To check your hard drive and see if you can repair it yourself, reboot your computer press simultaneously the "cmd" and "s" keys at startup if you see a black screen with white text, type: fsck -f and hit enter this does a "file system check", when finnished, type "reboot" and press enter. If nothing better happens, you'll certainly have to brinng it to an Apple Authorized Center Best regards

Jun 10, 2009 | Apple MacBook Air

Not finding what you are looking for?
Apple MacBook Air Logo

411 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apple Computers & Internet Experts

Paul Carew

Level 3 Expert

2557 Answers

Martin Buck
Martin Buck

Level 2 Expert

85 Answers

Paul Bade

Level 3 Expert

1572 Answers

Are you an Apple Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...