The box isn't powering the balls. we don't know if we have a short in the box, or not. 29310 Mega brands magnext icoaster

If the belt is slipping, you might try spraying a little hair spray on it to give it some traction.

check the wiring and connections to and from battery

Sorry but this isn't a warez site. We don't give out activation keys or access codes.

You could just have a loose wire inside the speaker but sometimes one speaker will just go to speaker heaven. Sorry I can't give a better answer and I don't know that brand so I don't know if you can open up the speaker easily to see if there is a loose connection. Now, sometimes the plugs can just wear out too which can be replaced if it is a great set of speakers but again, back to the lack of knowledge about that brand and how hard it is to work on.

Red is Power (12VDC), Black is Common Ground, White is Audio, Yellow is Video. The camera is from a "Homeland Security Brand" Camera and Monitor set that was being sold at Walmart about 2004/2005. That's the Black and White Model. The "Night Vision" portion barely works on these and the picture isn't very clear even during the day... They're nothing like, say, the CD-33 Ball Turret Color Cameras from SuperCircuits (Which are cheaper now than the HLS Brand B&W Cameras were back in '04). I understand that it's "What you have", just letting you know what to expect so you don't put any money into a system based on these. Hope this helps.

Hi,

I could not find them on the Mega Brands site. You can try this request form on the website:

http://www.megabloks.com/en/customerservice/age_requestform.php

Note: You need the UPC code from the box.

There is also a phone number at the bottom of the page to contact them directly.

Thanks for using Fixya.

What I did was spread the first magnet block apart from the track part underneath it slightly. I used my thumbs to bend them a apart a little more. Now each ball gets slowed down but not stopped by the top magnet, I didn't do anything to the down side magnet and the balls pass right through.

Of course just don't use too much strength. It just takes a little more separation.

Try giving them a call, MEGA Brands Products:
1-800-465-MEGA (6342)

go to thee web site and click on down load instruction booklet for that product make sure u have the model and serial numbers available you might nedd them , you should find these numbers on the bottom or side of the product it self or on the box if you still have the box the product came in.