Question about TORK 651A Photocell Controlled Mechanical Outdoor Timer with One Grounded O

1 Answer

I have a Tork timer model number 1101 24 hr time switch. Can you tell me how to set it???

Posted by on

Ad

1 Answer

Tork 1101 is a 120V mechanical dial-type timer

I have a Tork timer model number 1101 24 hr time - c79f9b8.jpgTork 1100 series

To set timer, you lift and rotate dial. Line up current time with the word Time located to lower right of dial.

Next, place trippers on dial. Dark trippers are OFF and light-colored trippers are ON

Tork 1101 is 120V timer.
120V Black Hot wire from circuit breaker connects to Pole L
There is a brass bridge that connects Pole L and Pole 1 >> if this is missing, put a jumper wire that connects both Poles
120V White Neural wire from circuit breaker connects to Pole X
White wire going to Load (lights, fan, motor) connects to Pole X
Black wire going to Load connects to Pole 2

Up-vote if this information was helpful. Thanks for the feedback.

Posted on Oct 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Timer cuts on , but will not turn off


assuming that this is a mechanical timer with set points for off and on red points turn on and black points turn off. set the red point for your on time and then be sure to set black point for off. Best to tighten 1/8 turn (slightly) with pliers so it does not slip

Nov 11, 2013 | NSI Tork Timer Switches | Tork 1104-FM...

1 Answer

How to set a tork timer


1) Copy following link to identify timer, and download possible manual:
http://waterheatertimer.org/Tork-timers-and-manuals.html

2) Tork TU universal
http://waterheatertimer.org/How-to-set-timers.html

3) Usually the dial will rotate manually until current time lines up with Time arrow located next to override lever, or time arrow located on inner dial, depending on model number.

4) Tork DTU digital timer:
http://waterheatertimer.org/How-to-wire-Tork-DTU40-timer.html

5) After opening links to identify timer, add comment and describe where you are, and what you discover.

Feb 20, 2013 | Intermatic T101 - 24 Hr. Dial Time Switch...

1 Answer

Tork pool timer dial, spins freely, not keeping time or switching on or off. Do I need a new one or can I fix it?.


Timer is not 100% identified.
120Volt Tork 1101 timers can be fixed with repair parts.
Generally, plug-in-outlet timer has gone bad, then it cannot be fixed.

Open following links to identify timer and then add a comment.
http://waterheatertimer.org/Tork-timers-and-manuals.html
http://waterheatertimer.org/Tork-consumer-timers-and-manuals.html

Add a comment for more help

Upvote the help.
Also take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Jun 09, 2011 | TORK 601A 24 Hr Mechanical Outdoor Timer ...

1 Answer

How do you program a Tork 602A timer? I can't get mine to cycle on and off at a desired time.


The Tork 602A mechanical outdoor timer with 2 grounded outlets.
Tork 601A and 602A manual
http://waterheatertimer.org/pdf/Tork-601A-Manual.pdf
Manual has images of timer that will help.

Plug timer into outdoor outlet.
To set current time, rotate dial clockwise until current time lines up with arrowhead located on inner dial.
Dial is divided into light and dark sections that represent day or nighttime hours.
Reset time after power outage.

96 pins located around timer dial are used to set on-off times.
Each pin represents 15 minutes in 24 hour day
Move pins in-or-out with fingernail or ink pen to set timer on-off functions.
With Tork timers, usually when pins are out, timer is ON.
When pins are in, timer is OFF.
To double-check pin setting, manually rotate timer to watch when lights turn on-off.

Set multiple ON/OFFs each day.
Change on-off times by resetting a pin or two.
Timer repeats every 24-hours.

Manual ON/TIMER switch is located on inner dial.

Set Manual switch to TIMER for programs to operate.
To override time and turn on Load, move override to ON position.

Dec 09, 2010 | TORK 601A 24 Hr Mechanical Outdoor Timer ...

1 Answer

I didn't get any instructions with my timer. It is a tork 601A I don't know how to set it. I think it looks great and just what I'm looking for. The case was sealed but no instructions. Thanks J Seel


Tork 601A outdoor timer manual:
http://waterheatertimer.org/pdf/Tork-601A-Manual.pdf

Timer has 1 125Volt receptacle located on bottom of timer

96 captive tabs located around timer dial allow times to be set each 15 minutes.
Move pins in-or-out with fingernail or pen to set timer on-off functions.
Minimum time setting is 15 minutes.
Maximum time setting 23 ¾ hours.
Set multiple ON/OFFs each day.
Timer repeats every 24-hours.

Dial is divided into daylight and nighttime hours.
Nighttime PM hours are on dark background.
Daylight hours are on light background.

To set timer, rotate dial clockwise until current time lines up with arrowhead located on inner dial. Reset time after power outage.
Manual ON/TIMER switch located on inner dial.
To override time and turn on Load, move override to ON position. To use timer functions, move override to TIMER position

Dec 02, 2010 | TORK 601A 24 Hr Mechanical Outdoor Timer ...

1 Answer

How do you set on and off mode???


d7a9037.jpg

Tork, GE, Woods, Intermatic make a series of timers that have pins
The pins push out for OFF or ON times depending on brand

Oct 15, 2010 | TORK 401A 24 Hr Mechanical PlugIn Timer ...

1 Answer

How to set a tork timer?


Tork makes a page-full of timers.

Rotate dial until current time lines up with arrow, then set the pins as shown in photo below

1) If timer plugs into wall receptacle, it has pins around the dial.
2) If timer replaced a wall switch it also has pins around dial.
5c2286f.jpg

GE and Woods and Tork and Intermatic each make similar timers.
Pull and push the pins to set times.
The wall-switch type timer also has a switch >>> move switch to Timer

Up-vote if this information helped. Thanks for the feedback.

Oct 15, 2010 | TORK 401A 24 Hr Mechanical PlugIn Timer ...

Not finding what you are looking for?
TORK 651A Photocell Controlled Mechanical Outdoor Timer with One Grounded O Logo

1,266 people viewed this question

Ask a Question

Usually answered in minutes!

Top TORK Hardware & Accessories Experts

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

rgbypoet

Level 2 Expert

166 Answers

 Kenneth
Kenneth

Level 2 Expert

50 Answers

Are you a TORK Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...