I have a memory craft 3000. it works but the display is faint

The Janome Memory Craft 3000 uses a low shank snap-on presser foot with a presser foot holder for most of its standard presser feet. See page 17 (page 19 of the PDF) of the User Manual available from Janome on the retired machine support page: https://www.janome.com/support/retired-machine-manuals/ . The current link to the manual is https://www.janome.com/siteassets/support/manuals/retired/computer/inst-book-mc3000.pdf . For specific presser feet that originally came with the machine, see page 3 of the manual (page 5 of the PDF). You can get presser feet that are known to be compatible at most sewing machine supply vendors, including https://www.sewingpartsonline.com/janome-memory-craft-3000-sewing-machine-parts.aspx?filter.ptype_gmcfeed_1=%20Presser%20Feet&index=39 or https://www.sewingmachinesplus.com/janome-mc3000-parts-accessories.php . A few presser feet have their own shank and require you to take off the holder.

I hope this helps.

Cindy Wells

try these sites
sewingpartsonline.com
premiersewing.com
sew4less.com
sewvacdoctor.com
a1sewingmachines.com
ebay

Hi,
you can go to this site :

link : http://www.sewingpartsonline.com/janome-memory-craft-3000-sewing-machine-parts.aspx


good luck


gorbesia

Try https://www.sewshop.com/#/Cords___Controls-8-4020.html. They have Janome power cords. The one fits the Memory Craft. Most of the manufacturer's use the same power cord for most of their machines.

Go online to sewingpartsonline.com and you canorder one for about $34. They sell a universal one that works for Janome.

http://www.sewingmachinesplus.com/pd60-043271111.php

you might try recharging the battery. make sure your
ac adapter is connected properly

just visit us www.janomestuff.com

HF 3000 is the same as Memory Craft 3000

Here is the link to download the manual for Memory Craft 3000....

http://www.janome.com/index.cfm/Machines/Computerized/MC3000/NoFlash/Media/?image=4#Machines_Specifications

Here is the Manual