Xantrex XPower Powerpack Sound - never used, error code E07 won't charge

Either charger has an issue or new battery is boogus. Check charger output for specs. Subject battery to a few discharge/charge cycles. If charger is definitely good and battery will not charge fully after a few cycles then you have confirmed that new battery is bogus.

get refund , return it then get new replacement

i have problen getting my powerpacksound to charged
my serial number isc13415328

There's nothing wrong with the battery pack. The battery in the flashlight is dead. Had this same problem, swapped out the batteries in the flashlight, problem went away.

My powerpack will not charge at all. I have used the cars charger as well as the typical wall plug in. I have left it plugged in for a week and only get an alarm sound and no power is coming out. Any suggestions would be greatly appreciated.

had the same problem, was going nuts. Then I pushed the button for the flash light charger and it stopped clicking. Here's hoping it works

depending on the amprage output it could be from 6 to 12 hours to charge a regular car battery.

You can use any adaptor that supply 12V or more. If you have at least 800ma of current, and 12V or higher it will do the job. Higher voltage rating will charged it much quicker but you have to watch it.

Machine no longer takes a charge. Light remains yellow, if you plug anything in there's not enough power. Any suggestions? Purchased XPower Powerpack 300 Plus from QVC appx. 6 - 8 years ago.

Click here to open the download page with complete documentation.

Don't forget to rate the solution.


Thanks.