Question about Nikon 624x50SF Matte Nikoplex Monarch Riflescope

1 Answer

I purchased the scope from US. After mounting to a Tikka super varmit I bore sighted it using a Bushnell Bore Sighter. I have been unable to get the elevation to 600 metres as it stops at 400 metres on the sighter. Can you assist please. Kind regards **** Letcford

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,702 Answers

Easy this one!!!! undo the eye end of the scope and slip under the scope 3 strips or so of 35mm film then nip the scope back down this will lift the point of aim well above what you need,,,
do your self a faver though,,,throw away that bore sighter,,,and bore sight the scope at 100yds first,
but clamp the gun in a gun vice when sighting it in,,,,you need to get rid of all the wobbely bits first?
gess whats the bigest wobbley bit,,,,yep,,,,,you are!

Posted on Nov 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Sight in your scope


I have given this tip to a dozen people this week. It will save you a ton of ammo. If you don't have a bore sighter of access to one, get a big cardboard box, cut V's in the top that the rifle will sit in nicely, remove the bolt. Find a target, 100 yards away, sight down the bore, tilt box, rifle to target, make sure it doesn't move, adjust scope to the same target. check to see if the rifle is still on, then check the scope again. This will put you on paper at 100 yards.

on Feb 17, 2010 | Optics

1 Answer

Bore sighter manual


You have not provided the model number of the laser bore.
Best to visit this site and look for the one you want.
http://www.ncstar.com/support/product-manual.html

Aug 11, 2014 | NcStar Optics

1 Answer

I NEED instructios for a bushnell truescope bore sighter # 74-4001t's your problem?


install proper caliber pilot, install bore sighter big end towards the scope, tighten set screw on the machined part calber pilot. align holizontal line with the horizontal line on your scope. make your adjustments to zero your scope by clicking the up and down or right to left adjustments. it's really easy after you do it once.

Aug 02, 2012 | Hardware & Accessories

1 Answer

I have a Bushnell Bore Sight with multiple adapters for various calibers, I have been looking for a bore sight for the 17 HMR, is there one available for the set without buying the entire set?


You can buy a laser bore sight that looks like a bullet that shoots a laser out. You just load it like a bullet and then sightyour scope to match it at the proper yardage. If you can remove the action(like with a bolt action) then you could just sight down the barrel(with the rifle in a gun vise) and then adjust your scope to point at the same thing you see through the barrel.

Jan 22, 2011 | Bushnell Laser Rifleshotgun Scope...

1 Answer

My cross hairs do not move when i adjust my sights. i bought a laser bore sighter and the laser points in the same exact spot no matter how far i turn my adjustments nor do my cross hairs move.


This happens a lot during bore sighting, - no shock to the scope to jar the cross hairs. So take your screwdriver and use the handle - rap the scope or better just tap it. Not hard enough to bend/dent it but jar it so things can move if need to.

Jan 04, 2011 | Tasco Target/Varmint 6-24x42mm Rifle Scope...

2 Answers

Cannot get to the bull's eye. rifle shoots 2" to right of bull's eye. after two full turns left on windage - nothing happened. I',m ready to return to the store. Any help???


continue to adjust the wind-age. If your problem persists I would suggest turning both to a random point and re-start sighting the gun. If that does not fix the problem return the sight because this most likely means the wind-age is disconnected.

Aug 17, 2010 | Bushnell .22 Rimfire 3-9x32 Rifle Scope...

1 Answer

I aser bore sight my Bushnell banner. I need to


if it is verry tight back it off a little bit you dont want to break the seal.i have never been a big fan of the laser bore sighters.i have had a cpl and both were inaccurate.BSA makes a good bore sighter for 49 bucks.try a cpl shots with it and find out how far you are truely off.remember 1 click is 1/4 inch.in 100 yrds.in the army we had all the ammo we needed to sight our rifles in.but here in the real world with ammo prices so high a good bore sighter is the way to go.

Oct 19, 2009 | Bushnell Velocity Speed Gun

1 Answer

Bushnell Sportview rifle scope wide angle 4x38 T4389 limited adjustment inconsistant results


Hello,
I had the same problem but was able to solve it by shimming the scope mounts with a thin piece of plastic. Put it under the rear to raise the sighting and under the front to lower. I still plan to buy my son a better scope.

Mar 02, 2008 | Optics

Not finding what you are looking for?
Nikon 624x50SF Matte Nikoplex Monarch Riflescope Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Optics Experts

kakima

Level 3 Expert

102366 Answers

Mark Campeau

Level 1 Expert

44 Answers

The Knight
The Knight

Level 3 Expert

74251 Answers

Are you a Nikon Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...