G wireless router

So, If you have internet connection speed problem with your wireless try with the following steps,
1.)Reset the wireless router by using the power switch on it or by unplugging it and plugging it back in.
2.)Place the wireless router in an ideal location. The higher it is, the better, but don't put it near metal objects.
3.)Get as close as possible to the router with whatever device you're trying to connect.
4.)Keep the router and your connecting device away from other electronics. You should especially keep away from phones, fax machines and microwaves. etc.,
5.)Adjust the Wifi antenna if it has one.
6.)Change the router's channel, especially if other wireless routers are nearby.
Following these steps would give you stable internet connection and also increased speed in connection. You can check your internet speed from www.scanmyspeed.com before and after following these steps.

Please try a different cable - it could be bad.

Are you trying to connect a computer to the network or it is another wireless device.
For this you don't need to use Linksys Easy link advisor.
All you need to do is, open the router set up page and check the settings of the router.
according to the settings on the router, you can connect the new device to the network.
is ther any computer connected to the router?
use that cmputer to open the router set up page.

I think you are trying to install the router using the CD. This CD has a bug. Even if your computer is connected to the router , it will say the computer is not connected to the router and it will give you error 322 or 321.
You can install the router without CD also.
Make sure that your computer is able to go online through the modem only.
connect the computer and the modem to the router and open the set up page of the router.
On the set up page you can change the settings of the router according to ISP.

Click Here for step by step instructions

Reset it.. Then plug into a LAN Port. Just http into it. To see if it works.. Let me know how it turns out.. www.ywaitsystemservices.com

error 321 or 322shows that the cable is not connected to the router and the computer.
That is actually a bug in the CD. Even if the cable is connected it shows that it is not connected.
You can set up the router manually, without the CD.
Click Here for step by step solution

For the technical mumbo jumbo on this error go here: http://support.microsoft.com/kb/328560

to fix it, go to windows update (update.microsoft.com) and download the .net framework service packs

try this power of both pc and router , unplug router power on pc then power on router see if it then picks up the isp, if not just simply unpup router and plug it back in while pc is running hope this helps!!!! good luck

Reset the router to factory defaults and reconfigure it. In case it doesn't work then try upgrading the firmware on the router. This should fix it.

You only need one to computer to setup router (you can use desktop)

For DSL connection follow the steps

http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=3687&p_created=1151389425&p_sid=khmabxfj&p_accessibility=0&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MTA0JnBfcHJvZHM9MCZwX2NhdHM9MTcyMSwxNzIzJnBfcHY9JnBfY3Y9Mi4xNzIzJnBfc2NmX2xhbmc9MSZwX3BhZ2U9MSZwX3NlYXJjaF90ZXh0PURTbA**&p_li=&p_topview=1


To setup wireless connection.

http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=3967&p_created=1159257209&p_sid=25Kkbxfj&p_accessibility=0&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MTU0NCZwX3Byb2RzPTAmcF9jYXRzPTE3MjEsMTcyMyZwX3B2PSZwX2N2PTIuMTcyMyZwX3NjZl9sYW5nPTEmcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD13aXJlbGVzcyBzZXR1cA**&p_li=&p_topview=1