Help intalling USB DATA CABLE DRIVER Sanyo Katana 6600

dear,
try to reconnect it with data cable with pc. Check if pc is showing something connected with it. If yes then check your phone connectivity settings. OR you can use bluetooth option by inserting a cheep bluetooth device with your pc. It will not cost much...

best of luck!

when you connect phone with pc ,,,,,,,,,,
check the usb connection type in settings menu phone setting and connectivity settings then for data transfer select the mass storage or data transfer mode.....

first of all instal the nokia pc suite software & attach the data cable
with phone & pc and open pc suite from desktop or start menu. you can see the photo in pc suite and download .

mohd ilyas

http://www.nextel.com/en/software_downloads/phones/sanyo_katana_dlx.shtml

click on more detail and then download

Do you have a data cable or are you uploading to the pcs picture site?

If you have a data cable use

http://www.bitpim.org/#download

i need the driver to download ring tones and pass the phone. I have the cable but I asked the driver

Qwest mobile IS Sprint! (at least for now)
Are you using the same phone you bought the cable for?
You really shouldnt need to use software. Once your phone is connected via USB you can open it like a removable drive. assuming the cable is the correct one for the phone.

Usually you can down load the driver/photo smart software you need. Go to your provider web page and see if they have it for a free download. Also when you put pictures on a CD at a store, those CD come with photo smart/share software that you can use. If you have internet access, you can send the pictures to email, then open your email and save the pictures in the computer.
Artgirl

What service do you have? If it is sprint go to sprint.com/downloads and you can install the drivers via usb for your pam. Hope that helps :)

You can get all the software and drivers you need here. http://global.mobileaction.com/download/download1.jsp?phoneBrand=17&modelID=603&go=+Go+