I Mac 10.l snow leopard - can we connect to kodak easy share for a C330 camera? We have install disk that came with camera but when installed it will not open. What is the problem? It always worked with the last computer, a Mac i book.

Check the manual, go to a camera shop, search YouTube. I would also contact Kodak or their website.

Firstly you will need to buy a copy of 10.6. This is available from Apple (see link below) or you could get a copy from eBay.
Mac OS 10 6 Snow Leopard

The following article will tell you what to do next:
An Easy Guide to Installing Basic Upgrades in OS Snow Leopard 10 6

You will need some install disks to even begin working on your issue.
Your options:

• Find someone with the same model MacBook Pro and borrow the disks.
• Buy a copy of Leopard (10.5) or Snow Leopard (10.6) and use them. If you are going to buy a set you might as well update to Snow Leopard (10.6)
• Check eBay for install disks but make sure they are for the same model MacBook Pro.
• Contact an Apple service center and purchase a replacement set of install disks.

Once you have a install CD, I would recommend backing up your system by making a disk image of the hard drive to an external drive. Then doing a clean install and then using the Migration Assistant to restore your user files to the clean install on your hard drive.

Apple recommends that if you wish to go from 10.4 to 10.6 then you should purchase the 10.6 Box Set.

System Requirements to run Snow Leopard:

• Mac computer with an Intel processor
• 1GB of memory
• 5GB of available disk space
• DVD drive for installation

Snow Leopard Installation Instructions:

1. Just insert the DVD in the optical drive.
2. Restart your Mac while holding down the C key.
3. You will be guided through the installation procedure and be prompted at one point to choose which install option you want.
4. Once the Snow Leopard install is completed the Mac will restart itself.
5. You will probably be asked to register with Apple upon restart.
6. Enjoy Snow Leopard on your Mac!

Q: Can I upgrade directly from Mac OS X 10.4 (Tiger)?

A: Yes. Apple recommends purchasing the Mac Boxed Set for this purpose, which will also update iLife (it is unknown at the time of this writing whether older versions of iLife work with Snow Leopard) and iWork. Also note that while it has been said that the $29 upgrade will work with 10.4, it is not officially supported and may be in violation of the licensing terms.

Q: What happened to the different install options? Can't I do an Archive & Install?

A: Apple has revamped the familiar installation options for Mac OS X. You now have two choices, either a straight upgrade or a clean install. Supposedly if you choose to do a straight upgrade, what actually goes on behind the scenes is what was traditionally known as an Archive & Install.

Q: Is there anything I can do to better prepare myself for the upgrade?

A: Yes. It is advisable to run a Verify/Repair Permissions and Verify/Repair Disk in Disk Utility. You may also want to run the maintenance tasks in Onyx. And finally, it would be wise to get your applications up to date using a program like AppFresh.

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Consider NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use iPhoto or any other photo cataloging program.

Consider NOT using the USB connection.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use iPhoto or any other photo cataloging program.

Hi there

Was it working before the Snow Leopard? If so, was Snow Leopard a new installation or an upgrade over an existing one?

Thanks

I work for kodak and this is actually a very easy fix.
The MAC OS 10.4.11 won't install off the cd only the website.
The cd sees that the OS is 10.4.1 not 10.4.11 just a glitch and the fix is installing from the website.

And no you need at least 10.4.8 to run the kodak printer on macs.