Error message E8 is shown in the clock display

For the Galanz 1.2 cu. ft. ToastWave, GTWHG12BKSA10, you need to press and hold the Clock/Timer pad for 3+ seconds. If needed, press again to switch between 12 and 24 hour clock options. Then rotate the dial until the correct hour is displayed. Press one of the following: the dial, Start or Clock/Timer to save the current hour. Rotate the dial to set the current minutes. Again, press the dial, Start or Clock/Timer to save the current minutes. To exit the clock setting mode, press Stop/Cancel.

HomeDepot has the manual for this microwave/air fryer on the product page: https://www.homedepot.com/p/Galanz-1-2-cu-ft-Countertop-ToastWave-4-in-1-Convection-Oven-Air-Fry-Toaster-Oven-Microwave-in-Black-GTWHG12BKSA10/310997710 . The current link to this manual is https://images.homedepot-static.com/catalog/pdfimages/e8/e87f4420-a777-460f-901f-faa70016a38f.pdf . See page 9 for the directions to set the clock.

I hope this helps. Please add a comment with the model number of your microwave/air fryer if the above steps don't work.

Try amazon.com.

Search Results

Combination Microwave Wall Oven - Error Code/Message ...

www.kitchenaid.com/...microwave...error-code...f6-error-cod...

KitchenAidQuestion: Combination Microwave Wall Oven - Error Code/Message - F6 Error Code -F6 E8. Answer. Product Symptom: Combination Microwave Wall Oven ...

Over-the-Range Microwave - Error Code - Starts with F ...

www.kitchenaid.com/...microwave-error-code...f...f6...code/P...

KitchenAidKitchenAid's product help articles give answers to your frequently asked questions (FAQs). ... Microwave - Error Code - Starts with F - Starts with F6 - F6E0 Code.

Kitchen Aid Oven Model # KEMS308SSS02 error msg - Lost ...

www.shopyourway.com > Manage My Life > Questions
I have a Kitchen Aid Model # KEMS308SSS02 and I getting the follow error message... is working and was always working but the top microwave/oven does not work. ...Kitchen Aid Oven Model # KEMS308SSS02 error msg - Lost Err/ F6 E0/ ... Most "F6/E0" fault codes is usually because of a loose wire connections, loss of ...

Error Code/Message - Oven - F1 Error Code - F1 E5

Control displaying F1 E5:

There may be a problem with the Oven Control, or the associated wiring.

Power unit down by turning off the circuit breaker(s) for one (1) minute.

Power unit up by turning on the circuit breaker(s).

Monitor the oven for one (1) minute to ensure the error code does not display again.

Verify oven operation.

just go to breaker box and turn off the breaker that powers the stove

This is a door switch problem, one of the door switches has malfunctioned preventing the microwave oven from running.

If you google search bosch gourmet the second item down titled "bosch household appliances" you can download a manual from there

Hi,
On GE models, "SENSOR ERROR" appears on the display when:

• Using the sensor feature, the door was opened before steam could be detected. Do not open the door until stream is sensed and time is shown counting down on the display.

• Steam was not detected in the macimum amount of time. Use Time Cook to heat for more time.

Thanks.

This is a problem with the control panel assembly, and we repair these for customers nationwide with our guaranteed $39.95 service.

Feel free to contact me directly.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller
[email protected]
http://www.microwavedisplay.com

Not sure on Bosch, since it's a non-US brand, but that may be a bad door switch.

If you or someone you know decide to look into it, we have critical safety information, info on door switch diagnosis and replacement, and disassembly information at our site, and our link is at our listing here on FixYa: http://tinyurl.com/yzjozk

Otherwise, you can get Bosch support here.

We're happy to help and we appreciate your thoughtful rating of our answer.