When i switch my phone on the screen stays black but the keys light up

talk to CISCO on there official forum. real
start here
https://community.cisco.com/

why go anywhere else. as rules can be fluid , for sure
if security gets more tight every day.
talk to them , actual

i had the same problem when i turn my phone on the buttons lights come on but te screen stays black and the phone doesnt turn on. the lights stay on

Disable your accelerometer in your phone setup and see if it solves your problem.

Cool Rhyming Question!
So, am I understanding correctly, when turned on, your phone will light up (LED's, Keys, Etc) but the screen will stay black?
If your phone does this, you have a faulty LCD screen. You can get this fixed for about $65 from here - http://www.jcdrepair.com/motorola-cliq/lcd-repair

Hmmm... I have the same problem... did you end up getting a solution for this?

you are gonna have to get a new phone you have somehow burnt out the back light probably left it on all the time. Sorry hun if still under warranty might get one for free

just visit motorola service centre, there is a problem in its FPC cable

I've experienced that before...try to check your "backlight" in the "display settings" of your phone it might be just turned "off" that's why it's black.

you need to have the phone reflash and also have the phone LCD replaced or flexcable.

You have to use the FN key and F5 to change between the LCD screen and the external monitor. It may be F8 also, depending on the laptop model.

Look on the F keys for a little picture of a monitor.

Once you have found it, hold the FN key and tap the F key and it should switch to the external monitor.