At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: The flash stopped working but the camers still works....
Look for a used one because the cost of fixing that one may exceed the cost of replacement. Plus if you buy another same model, then if something else goes out on it you will have a second camera for parts.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Test ur tv remote control first see,if it is working,malfuctions or completely dead?U have a Digital Camer wright?Yes.Digital Camera can read Infer Red signal Output by the tv remote.Yes?Turn the Digital Camera on and take the tv remote point it at the Digital camer and pushes all the remote buttons the Infer Red signal will read all buttons Infer Red signal flashes u can see on Digital Camer viewing screen.Pushes all remote buttons see flashes of white lights.Mean the tv remote control it it good or not.Take some cottons ball soak it with some rubbing alchachol clean the tv Infered Red sensor on the tv frame near the power LED incation light.Might be dirty,Still not reading the Infer Red signal.If 100% it is the tv remote control is the cause,it CPU is dead.Try website like Remotes.com to buy another the tv original remote.
Check the contacts on both the camer and the lens. I usually clean mine with methylated spirits or isopropyl alcohol.
I have to do this every 3 months or so as dirt or even oils from your hands can stop the contacts from working properly.
First look at you mode dial on the camera and make sure it is not on the setting with a picture of a flash with a cross through it. If that doesn't work in your menu see if the flash is disabled. Note: When On A Manual Mode You Need To Manually Pop Up The Flash
Repairing the flash is probably too difficult for most people as a DIY solution. Professional repair could be quite pricey. I would suggest buying the same model on eBay but one with a broken screen, they're quite common. Buy as carefully as you can, most sellers will admit to additional faults and even claim a working unit. Don't pay more than £10 plus postage, and swap-out your screen. This is an easy DIY project. You will need a small tri-blade screwdriver and a small pozi, but takes less than 10mins with care. Further info if required. Paddywack.
my night vision USB PC(vimicro-301Neptune) camera Model-IT- 305WC stopped working Earlier was ok for >6 month. Now itis asking for New software. i am on windows XP.Pl help on software/hard ware. down loadRegds.vachaspatiSharma [email protected] [email protected]
×