TV keeps clicking on and off and doesn't come on.

You can reset and eliminate the lock on some televisions without the remote, using a few tactics. Hold the power button for five seconds. The television will automatically restart. If the lock is still on, unplug the television and remove the battery from the back panel of the television.

Send your tv back for professional repairs as this is the first sign of failing LED's somewhere in your tv. I hope this helps

The five-minute limit has nothing to do with the memory card or the video resolution. In some parts of the world video cameras are taxed at a higher rate than still cameras. Cameras that can only record videos up to five minutes in length are not considered video cameras and thus are taxed at the lower rate.

When was the last time you saw a movie or TV scene that was five minutes long without any cuts or breaks? It doesn't happen often and very few people find the five-minute limit restrictive.

Video quality is a very subjective thing. The quality is better than that of almost all compact still and video cameras. It's not as good as professional-quality video cameras. Video has a different "feel" from film --- but which is better?

Since the recording length doesn't depend on the resolution, I'd suggest you always record at the largest resolution. Videos can always be shrunk in size --- they can't be expanded.

Don't mess about with it. Get it replaced under warranty.

This tv 100% have power supply board problems and might also have the T-CON decoders board problems too.The power supply board,that the board,where the power a/c cord plug into it.The T-CON decoders board,that the board sit wright in the middle bottom of the LCD screen panel.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.Replaced the power supply board,should get ur tv power up right away and work,no more series of clickings noises.But,if the tv still have alots colored pixels lines on the screen.The T-CON decoders board it also dead.Replaced the T-CON decoders board too.

try unplugging the power cord for 10-20 seconds then plug it back in. This is a when all else fails try. If it doesn't work it sounds like the T.V is going out. Check your T.V's handbook it might tell what the issue is.

shut off your copier and let it rest for 10 mins.. and turn back on,


if it is still no good, call for repair!

All symptoms in your TV shows that you need to replace its Lamp as it has been consumed its life hours and TV requires new lamp. Lamp can be obtained from Sony Website. Price is $200, Hope this info will help you to enjoy your Sony TV in coming days.

5 blinks is telling you that IC4511 on the DG board is faulty. This is not serviceable you will need a new DG board the part number of that board is TNP2AA126