ASUS P5GC-MX/1333 Windows 7 32-bit How do i enable the on-board vga as well as a pci-e graphics adapter simultaneously?

@zen_cool

Make sure you download and install the VGA, Audio, and Chipset drivers from the Asus website by clicking here. If you have a third party device plugged-in (i.e. USB Bluetooth adapter, etc.) make sure you install the driver for the correct system architecture (i.e. Windows 7 32bit driver will not work on a Windows 7 64bit OS).

Good luck.

Hi, you can download a manual
and drivers here for the mainboard:

http://www.asus.com/Motherboards/Intel_Socket_775/P5GCMX1333/#download

Please select your operating system.
Select manual and click on global for download.
Unzip the file before installation.

You can use the graphic card as long it is for
socket PCI-E.

You can download the latest graphic drivers here:

http://www.nvidia.com/object/product-geforce-gt-430-us.html

you can use up to a maximum of 224 mb of your computer's RAM for the onboard video chip to use. You can install a video card with any amount of memory (which would give you a lot better video performance).

Yes, if is a PCI-E video card.

try to connect with this links :

1. audio driver click here
2. Graphic driver click here
3. Lan driver click here
   

you can download from this site.http://support.asus.com/download/download.aspx?model=P5GC-MX/1333&SLanguage=en-us

Yes you can put a 1 gb card. The motherboard has PCI Express so you don't have to worry to much. The older AGP cards are almost gone.

You could buy a GeForce 8500, 8600, or 8800, or the 9 series. You can also buy a Radeon HD 5870 or 5570.

If you need further assistance, please post. And do not forget to rate.
Thank you for using FixYa

To solve this problem you have to do the following things in the series.

first remove all the extra cards and then connect to the onboard vga connector. then start the sys and go to bios settings. if you know the advanced adjustments then
correct them as follows. otherwise just select load optimized settings.

first go to the video card selection in advanced
and then set the setting to pci/pciinternal or pciint/pci ext

then set the pallette snooping to yes.
shutdown system

place graphics card and then donot change any setting. then you'll get the display.

i have the same motherboard and i also faced this once. it is not a problem it is just misconfiguration.

Try reading the motherboard specification or user's manual/instruction manual if your new graphics card is in their product's whitelist.

Hi,
You can download the drivers from the following link.

http://support.asus.com/download/download.aspx?SLanguage=en-us&model=P5GC-MX/1333

Thanks