Audio Players & Recorders Logo

Related Topics:

Posted on Jan 27, 2008

Manual for Teac ag-v3050

If someone could please email me the manual or give me a link to the manual. I have lost mine. I am having problems getting all the speakers working.

Thanks,

Keith
[email protected]

  • moviemento Jul 23, 2008

    NAO TENHO MAIS O MANUAL DE MONTAGEM E NAO ME LEMBRO MAIS COMO SE LIGA O SUBWOOFER PRECISO DE AJUDA



    OBRIGADO

×

5 Related Answers

Michael Borelli

  • 979 Answers
  • Posted on May 10, 2008

SOURCE: i have an older TEAC

Output driver work is needed. Also, check all speakers for damage or failure...accordianman

Ad

Anonymous

  • 7 Answers
  • Posted on Jul 12, 2009

SOURCE: fuse blows everytime i turn it on

the blue coloured varacter in your power supply circuit needs to be changed

Anonymous

  • 4234 Answers
  • Posted on Jul 16, 2009

SOURCE: My TEAC AG-7D turns on for about a second but then turns off

There is a problem in the final stages of the amplifier section that the protection circuits are detecting. They then shutdown the unit to prevent further damage. The most likely candidates are the output transistors. This is a relatively simple repair for an audio shop. Expect a parts cost between $20-$45.

Dan

Anonymous

  • 1 Answer
  • Posted on Dec 02, 2009

SOURCE: Teac AG-V8525 Stopped producing sound. Has legend says "protect"

hit reset button back of receiver

Anonymous

  • 1 Answer
  • Posted on May 31, 2010

SOURCE: Teac AG-V8520

same problem exactly

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Teac AG-V3050. Everything looks right but puts out no sound to speakers. Have trien many speakers. Is there a fuse, reset, etc? Thanks

I nce had the relay for the amplifier die on one of my receiver. Basically this will allow the amp to power on and supply voltage to the speakers. Same thing though, i could access all of the menus, adjust setting, and volume but no sound because the amp never clicked on.
0helpful
1answer

My AG-V3050 pro-logic receiver seems to have a volume control issue. The test mode volume works fine but when I switch it to fm the sound is very weak, I have to crank it all the way up to get a little...

Hi
Two dump question and than recommendation..
  • First ;During listening FM ,Your " MUTE" switch is "ON" or "OFF" ? if not how about plain STEREO mode ? did you try it ?
  • Second..how about the other Modes , i.e ..CD ,DVD etc. ? same problem or it happens only in FM ?
ok..now the possible solution;
sometimes FM stations do not properly triggers pro-logic circuit and cause such problem and you need to switch to STEREO or A.F.D mode to listen FM (AFM includes sub woofer)..
This is true for FM only and it should not happen in other modes as DVD ,CD,Phone etc..
Hope this helps!..if more help requires pls let me know.
Take care and please
Remember to rate/vote and give me 4 Thumbs Up for me to continue f
or Helping out the Community :)
4helpful
1answer

I just want to know the wattage on the Teac AG-V3050

Teac AG-V3050 and Teac AG-V8050 are very compatiable to help with this question the total watts per channel are 100 watts. Hope this answers or at least helps. Excellent unit, great power to supply great sound for the unit at its time.
0helpful
1answer

TEAC AG-V3050 FM reception was fine and then quit. Checked antena with no results. Internal component? Fuse?

If a unit turns on it isn't a blown fuse. Does the tuner give you indications that it is or is not tuning a station? Change the FM Mode to Mono. You should at least be able to hear FM hiss if the tuner is alive.
1helpful
1answer

Lost manual..do not know what is the difference sound surround

Hi use this link to download the manual .

manualnguide.com/manual/teac-ag-v8060-receiver.../page/2/.

Take care.
0helpful
1answer

I need a user manual for a AG-D7900

User and Service manual available HERE.

Or eMail [email protected] with your manual request.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
0helpful
1answer

Manual

See this article. Use lots of colors, that helps.
This article may also help, and include some good photo links of cables and diagrams.
If you're looking for a manual for that receiver, see here.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!
0helpful
1answer

Fuse blows everytime i turn it on

the blue coloured varacter in your power supply circuit needs to be changed
0helpful
2answers

Lost manuel for teac ag d9100 reciever

you can download a manual for $9.99 from User-Manuals.com....I did this today and the manual is identical to the original it seems
0helpful
3answers

Setting Up The System

You can find the requested details at: http://www.teac.com.au/file/product_manual_408.pdf
Not finding what you are looking for?

1,403 views

Ask a Question

Usually answered in minutes!

Top Teac Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Brad Brown

Level 3 Expert

19187 Answers

John
John

Level 2 Expert

510 Answers

Are you a Teac Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...