Teac CD-P1250 CD Player Logo

Related Topics:

Question about Teac CD-P1250 CD Player

1 Answer

CD player won't play disk and says "no disk"

Just got a TEAC sr-L100 cd player/radio, etc., and it played the first cd fine, but has not worked since. It attempts to read the cds, but then fails and says "no disk." The disks work fine in other players.

Posted by unable2click on

  • 3 more comments 
  • Anonymous Nov 03, 2008

    I have a c.d player that I bought in July. I've had it for about 3 months. Last week, I tried to play one of my c.d's, but it keeps saying "no disk". It comes on and loads but it always read "No Disk". I really don't want to buy a new one. So can you tell me what I can do to fix it.

    Thank you!

  • lukemh Dec 14, 2008

    My C.D player is about1 and a half years old and it says o disk all the time

  • andreaallen Jan 04, 2009

    how do I get to the lense? I have a 3 disc changer and it comes out like a draw do I need to remove this draw to get to the lense?

  • Anonymous Jan 06, 2009

    Put a DVD in the CD player and now it reads No disc and just clicks when I put a regular CD in the player.

  • Larry Stiles
    Larry Stiles Nov 15, 2014

    take the set to Paradyme audio on arden and fulton in sacramento.


1 Answer


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 2,071 Answers

The problem of "'no discs'"displayed is in the mechanism in the roller thats moving back and port bringing the lense set .The old grease thier is already hardened that cause the problem.Clean that by using a lighter fluid or like that fluid to take the old grease,and put it with a new one first class grease type-A grease put only a little grease and wipe the lense with a cotton buds without any chemicals on it .Try this solution so performance will be better.

Posted on Jun 18, 2008

  • Beverly Paul
    Beverly Paul Feb 11, 2014

    Imay be alittle green but where do you put the grease is this the door that goes up and down your refering toor which is the roller


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


How to set clock on the teac sr-l100 just bought at yard sale, no info book. thanks d

The "set time" button on my SR-L100 is located inside the CD compartment. To set the time the unit needs to be in the standby mode. Press and hold the set time button until the time blinks, then use the tuning/clock adj. dial to set it. Hope this helps!

To set the alarm on the TEAC SLR 100:
Be sure the radio is set to off or standby.
Hold down the BUTTON for the alarm you wish to set (#1 or #2) until the TIME ON THE DISPLAY begins flashing. Use the TUNER/CLOCKSET DIAL to change the display to the time you wish the alarm to go off. pRESS THE ALARM BUTTON BRIEFLY TO RETURN TO NORMAL OPERATION.


I have a teac x-9, and during cd play, the cd doors randomly open and close causing me to restart cd play all over again. it does this on its own, and i don't push any buttons for it to occur. is this...

clean your eject button or check it 2 see if it is broke. if u have a remote try 2 play a cd with the cd player with the batterys out of the remote. last 1. the cd door could be off trak witch wood make the cd off balance when the eye goes 2 read the data on the disk it misses its data an will cause your cd player 2 open.

Recorded audio CD will not play

Most likely the recorded format is wrong and that is the cause.

My teac dvd/cd player wont play some cds

Probably a codec problem on the notebook. rather than a drive problem. Try a 3rd party media player such as Real Player or Quicktime

Teac SR-L100 Clock Radio

There is button inside the CD chamber. Press it for a few seconds.

CD Music System Clock Radio SR-L100

Open CD Cover. In the left rear is the time set button. Depress it for at least 3 seconds and you will be in the time set mode. Use the "Skip" rotary knob to adjust the time.

Turntable does not turn

First, try cleaning the lens.Use a good quality Lens cleaner. If this does not work, Open machine and see for mechanical problems - broken belts, etc.
Not finding what you are looking for?


Ask a Question

Usually answered in minutes!

Top Teac Audio Players & Recorders Experts


Level 3 Expert

5754 Answers


Level 3 Expert

85242 Answers

Brad Brown

Level 3 Expert

19166 Answers

Are you a Teac Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides