How do i calibrate the screen - Husqvarna Viking 1

Question edited for clarity and typo.

Did you try a Power Reset screen recalibration?

User's Guide

Husqvarna VIKING https://www.husqvarnaviking.com > ClientSite PDF Your HUSKYLOCK? s25 features a Touch Screen. Here you will find all the basic ... Touch the calibrate icon to open a special screen for touch screen calibration.
52 pages

I tried to calibrate the touchscreen on my huskylock s25 and

JustAnswer https://www.justanswer.com > Car Electronics Repair Jan 21, 2018 - I tried to calibrate the touchscreen on my huskylock s25 and then the touch screen stopped responding - Answered by a verified Car ...

1 answer · Top answer: Welcome, I'm Chris (aka-Moose). • I am attempting to get to and assist every single long ...

Huskylock s25 Screen issue - Sewing Pattern Review

patternreview.com https://sewing.patternreview.com > topic Mar 23, 2018 - Huskylock s25 Screen issue. PatternReview.com forums and message ... Is there a way for you to re-calibrate the touch screen in the settings? Screen problems are a known issue

https://www.google.com/search?q=huskylock+s25+touch+screen+not+working

..

take it into repair shop. not a diy task

Perhaps this will help:

Janome MC 9000 off touch screen calibration Janome Memory Craft 9000...

Sounds like the touch screen has gone bad. You should take it to your nearest authorized husqvarnaviking dealer. You can find your nearest dealer at http://www.husqvarnaviking.com/us

I suspect the calibration of the screen is out of adjustment. Take it to a professional but don't let them replace the screen or motherboard before asking them whether they tried to re-calibrate the screen.

Check to see if there is some sort of Touch Screen Calibration mode that you can use. I'm not familiar with that model, so I don't know what menu items you have available. Is there a Utilities function? That might be where something like Touch Screen Calibration would reside.

Another thing that I just thought of is you might have a dead battery for the settings. Some devices have a battery that keeps a voltage applied to a chip that contains settings information. If the battery has died (too old), the settings may have been erased. Data such as Touch Screen Calibration values would be stored in this memory. These batteries usually keep the memory alive for several years, but they eventually wear out. More modern devices keep this info in Flash memory that does not need a battery. Screen calibration is usually done at the factory when the machine is manufactured.

I would suggest taking the machine back to the one you bought it from & see if they have another one that will calibrate ,,& if they don't have one ,, I suggest another sewing machine dealer..
or you can try contacting Phaff customer support by phone or email & see what they say

Thanks guys

I remembered the fix!!

On the Janome MC 9000

To calibrate the touch screen

1. Turn off
2. on Sewing arm above needle there are a series of buttons
3. Hold down bottom 3 buttons
4. While holding turn on machine
5. Using scribe
6. Touch the centre of each + as it appears
7. It will go Centre bottom rh centre top lh as you select each + position it moves of it's own accord.
8. Turn off machine
9 Turn on and test.

Important sometimes this does not entirely fix prob!!
Simply do it again "Yahoo""
Some mechanics will try to tell U the screen is on it's way out
Bollocks just calibrate.
Thanks
CYA

We already fixed the problem, but just the same, our own premium plan is going to cost you ( an eye for an eye)

Thanks