I have a audiovox sts93 dvd home theater system. some button was pushed while in options mode that made my screen on t.v. go haywire. now i cant get back to that part of options menu, cause i cant see anything on the screen

You could use any search engine to find it.

$35
http://remotes.com/remotes/servlet/rs?a=gmi&uuid=A13140907454061&smodel=STS93&brand_pn=AUDIOVOX_STS93


$21.24
http://www.ebay.com/itm/AUDIOVOX-STS93-HOME-THEATER-REMOTE-CONTROL-/380347129808?pt=LH_DefaultDomain_0&hash=item588e749fd0

check the audio settings make sure they match where you plugged the source. and if all of your sources run into the tv first you will need to have an audio out to the reciver

It all depends on the TV transmission. If it is stereo, you will get the surround sound. If it is not then you have to listen to ordinary sound.

You can try lense cleaner, and if that do not work, it requires repair in which the laser assembly needs replacing cuz they do go out often. Laser diodes are easy to go bad because of current surge.

make sure that they are all from the same region. Also check to see if they are NTSC or PAL...based on your DVD player.

PLEASE VOTE IF THIS WAS HELPFUL..THANKS AND GOOD LUCK.

I have similar problem with a Philips CL034 Universal Remote and a Memorex MVD2047. The Philips/Magnavox codes listed at this link did NOT resolve the problem. I tried all Memorex codes and tried the "all coded step-through" method. http://www.universal-remote.net/philipsmagnavox.html The above is NOT a solution, rather a note on a time consuming attempt to a solution.

I use a pocket knife to help mine open and then push it close. As far as i can tell the tray for this model was ill designed coupled with a crappy motor that may go out with out reason or warning...

I need the codes for a Phillips Magnavox Universal Remote for a Samsung tv.

Thanks,
Nita

unplug it and plug it back in and press the progressive button to turn it off, should work. Yeah that blue screen sucks, i would have thought you can get to the menu no matter what but that's sanyo for you, well most other brands also...

I would get a copy of the manual first. Check the speaker settings in the menu or front panel to deterimune if the "A" channel for the front are turned on. Center speaker will work under Pro logic settings(all). A stero source is required for at least Pro Logic processing. I looked unit up on e-coustics and found some speaker set-up problems related to input level.