An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert that has over 500 points.
Re: Lenova N100, Screen Blank
Can you push the f2 or delete key when first starting computer, If you get a bios screen you want to reset the computer to factory settings just follow the directions in the bios to reset to factory default, You may also want to try the Blue FN key lower left hand side, and the f8 key at the same time let me know if that works for you
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
need some clarification do you see acer name on the screen when u boot the laptop. if it not then u might having the issue with screen or the display card.
u need to buy the screen or the motherboard. if you stay in india then i can tell u location where they can repair the issue.
How old is the laptop? You may have suffered one of two things? First of all, if the hard drive will not boot back up, even after using the recovery discs, then that would explain it powering off. I have seen this happen on old desktop hard drives.
Next, try to get the transformer or adapter tested. It may not be putting out enough amperage to run the laptop.
It appears that the display resolution set in your display properties is out of the range that the LCD can display.
Boot to the ENABLE VGA MODE by pressing F8 to get the Windows Boot Menu. If you can get to the desktop, then go to display properties, and see if you can change the resolution to higher settings and maintain video. (If the video blanks out, then it should revert to the previous setting in 15 seconds)
Are you able to press F8 and try safe mode? Did anything change as far as video when it stopped working? Do you have another monitor to try? A bootable CD is an excellent idea. You may need to go into the BIOS and change the boot order but usually putting a bootable disk in the drive will make it boot off the CD. Look around the BIOS settings and make sure everything looks ok there too. Probably not a solution, just things to try.