Central locking doesnt work on mk2 clio t reg

Climb in vehicle close door press and hold central lock button on console. Doors lock and unlock. Release lock button press and hold button on key for a few seconds doors should lock

I had a problem where my key fob did not lock or unlock the car, Renault Clio Dynamique, but the central locking button in the car did still work and engine turned over fine. Changed the key fob battery still nothing. Read online about disconnecting and reconnecting the car battery, (negative only) and hey presto it worked! All working fine now!

Battery connections

hold the cetral locking lock all button down until the doors lock and unlock. The imobilser light goes solid red. At this point you have 10 to press the botton on your key 2 times . the doors will unlock and lock.

CHECK FUSES/CENTRAL LOCKING RELAY/LOOM IN DOORS FOR BROKEN WIRES

replace TDC sensor.

try my last solution posted, connectors on renault clios renouned for corroded electrical connection car guaranteed to start unless car needs replacement loom these also prone to fail very bad design of wiring connections they did a better job in the 70s

central locking on my 93 corsa with standard key, not electronic type as used on later models, all doors are locked and refuse to open, ive checked fuse and thats ok, doors refuse to open from inside the vehicle and from outside, only the tailgate will open from the key, any ideas ,,, thanks dave

try looking in the door and see if the bar to central door lock mechanism hasnt come off where the little plastic clip has broke that retains it

the key has lost its code. open the doors manually and use the central locking button inside the car. hold it down and keep pressing your key fob. this should re code the key