Mercedese s 32o model 2000 change the langauge to

Found this in Note Owners Manual, hope it helps.

Language set-up mode
In order to enter the language set-up mode proceed
as follows:
1) Make sure the audio unit is switched off.
2) Press and hold buttons 1 and 4 simultaneously.
3) Press the power button and the radio will switch on.
4) Release all the buttons and the display will show
LANGUAGE.
5) Press the << or >> button and the language
setting display will change as follows:
ENGLISH ? FRENCH ? GERMAN ? ITALIAN
?DUTCH?SPANISH?POLISH?ENGLISH
Once the language has been set, switch off and
switch on again the audio unit by pressing the power
button.

The irony of this is that the handbook is in English
For Toyota Avensis from 2003:
My console has a screen with a row of buttons below it and a centre mounted knob (the enter knob)

press Menu (1st left of knob)
select SETTING from navigation menu (on screen)
oddly you need to read the foreign language to do this one)

turns out mine was in german so not too hard, third down IIRC

select LANGUAGE from SETTING end press ENTER (knob)
again, I guessed which was 'language' by trial and error

select Km or miles press knob

leave well alone lol

Let's face it, if it was in English we'd not need the instructions, just time.
Good luck (you'll need it)

Hello there we can do this for you in regards

Please contact me at [email protected]

hi,
the language can only be changed using diagnostic equipment.
if you have a diagnostic machine, you need to go to dash(some machines address17), then go to adaption channels(some machines adress 10), chanell number 4. this can be set to:
0...off
1...german
2...english
etc
hope this was some help
regards
P

do a language tranlation go to
http://www.worldlingo.com/en/products_services/worldlingo_translator.html

then look for the word Sprache it is german for language once there do a reverse translation of the section online and print it's bit of a pain but it can be done

Hi , it is posable to change the language on the display , it can be tricky to change , unless you can translate german , other than that you should be able to visit a dealer to solve this problem . regards mark

key for the bluetooth should be generic four zeros. As for the language, try resetting the nav to factory....Hopefully this helps

If all other text in the display is in English then you may well have the German language CD... nip to yr local dealer and ask them to check the CD serial or model number against there database.

hi you need to take it to the dealer to have it scanned. There is a way to fix it with the buttons on the dash. But you need to know German if not the dealer can fix it and it wont cost much to get it fix. hope this helps

workitover

LOOK AT YOU OVERHEAD CONSOLE. PRESS THE BUTTON THAT SAYS"MENU" UNTIL YOU SEE
"LANGUAGE" LOOK FOR ENGLISH THE PRESS REST BUTTON