Can anyone tell me what is the latest TSPSC Vacancy?

That will depend on the bylaws applicable to your specific organization. Each organization will have it's own rules that may not be the same or even similar to another. You need to read the bylaws to see how this situation is handled.

What is the question?

Do you have a question?

What kind of problem?

I have the delay adjustment set on "test". It comes on right away but turns off too soon. If the delay it turned to anything but "test", it will not come on immediately. Is this switch defective? I have another for another location but don't want to open the package until I know the answer to this question.

Physically removing a piece of an ignition key from the tumbler is practically impossible. The tumbler is filled with spring loaded tabs which raise and lower against EVERY notch on a key. That resistance will fight your every motion as you try to back the key remnant out. As one tab releases, the next in line raises into the vacancy just created. GM, even with the "fob"/ chip installed in most of their keys, also put greater anti-theft detail into their ignition tumblers. IF this is an ignition lock that has a chip sensor, the practical repair is a complete key/tumbler replacement. This isn't a DIY repair. It will involve removing the steering wheel and column covers, air bag, AND re-coding the vehicle computer to accept and recognize the new key/chip code. The re-coding CAN be done at home. Immediately after the new tumbler is installed, leaving the ignition in the "run" position for 1 hour, will re-code the antitheft in the computer.

sir,
I am chandrakanta sahoo today find a msg. from dm-hrcall, I intrested to job inskodalimited . so I request to you please give me a msg about this job vacancy at by my ID- [email protected] .
your faithfully
chandrakanta sahoo