I got an error 24 on spindle drive? what could be a problem? it is fanuc spindle drive a230-0505-x004

That means the bearings on the drive are shot. Time for a new one.

Spindle usually refers to the spinning axis of the carbon disks or the platters. The disks are likely not spinning and a drive replacement is required.

i have beaver vc15 with fanuc 6m . when switched on to main breaker it is worked . but when control power on then it is tripping

control is not on.

The error you received (2000:0147) indicates the drive has failed. It cannot be fixed. You need to replace the drive.

no luck finding a manual online. you will need to call them.

Corporate Headquarters
1800 Lakewood Blvd.
Hoffman Estates,IL 60192

1-847-898-5000
1-847-898-5001

Department Phone Fax E-mail Part Sales 1-888-FANUC US (select-1) 1-847-898-5021 Service 1-888-FANUC US (select-2) 1-847-898-5011 Repair 1-888-FANUC US (select-3) 1-847-898-5590 Training 1-888-FANUC US (select-4) 1-847-898-5319 Option and CNC System Sales 1-888-FANUC US (select-5) Option Sales (select-1) 1-847-898-5006 CNC System Sales (select-2) 1-847-898-5691 Accounting 1-888-FANUC US (select-6) 1-847-898-5016 Service Contracts 1-888-FANUC US (select-7) 1-847-898-5031 If you have technical, service or parts related questions, or request requiring immediate attention, please contact us directly at our toll-free number 1-888-FANUC US (1-888-326-8287).

Good luck

Please rate FIXYA

dear sir
iam from india .my name anand.now am using cnc vmc
machine .control ;fanuc 10m .EMG alarm coming .how
solveing that problem.pls reply me .


thank you.

Manual is available in the following link

http://www.pdfgeni.com/book/fanuc--0m-programming-manual-pdf.html

The parameters 900 to 940 are different for each type of machine. You need to specify the control

Backup & Restore Fanuc parameters.
http://kfasllc.com/memory_backup_restore_F1618.htm

Dim Str As StringStr = "ashu"
MsgBox UCase(Left(Str, 1))

Cut the first Char and Concatenate other