How do I replace a fuis in a Viking husqvarna platinum 755 royal edition

Only available here on amazon, but unavailable. My guess is that it is out of print. Not available anywhere else.

The Platinum Family Handbook: Keeping the World Sewing ...

www.amazon.com > Platinum-Family-Handbook-Keepi...

The Platinum Family Handbook: Keeping the World Sewing (Husqvarna / Viking) Paperback - January 1, 2000 · Publisher Husqvarna Viking · Publication date.

I did find the Service Manual? That is unusual
https://www.flickr.com/photos/jmschneid/albums/72157670610873150/

Did it work in the past? Did you buy the machine new? Take it to your local Viking dealer and they can help you sort it out. https://sewing.patternreview.com/review/machine/4022

http://manuals.husqvarnaviking.com/VSM/Husqvarna%20Viking/HVManual.nsf/1fd5659e6f37141041256697003e64c0/70aaf6b2cb9f8cd8852575ec006cec14/$FILE/Viking%20750%20Platinum%20x.PDF

http://www.husqvarnaviking.com/en-US/Machines/PLATINUM-750-Quilt

When you see this message, wait until the OK message is enabled. Tap the OK button and then resume sewing. This message occurs often enough to be listed in the manual under Pop-up messages in both the Sewing and Embroidery section. (That starts on the last few pages of each of these "chapters".) Turning off the machine while this message is displayed may cause on issue with the on-board computer.

For the Husqvarna Viking Designer Diamond Royale, you can find the manual on the product page: http://www.husqvarnaviking.com/en-US/Machines/DESIGNER-DIAMOND-Royale . The direct link to the manual is http://www.husqvarnaviking.com/getattachment/Machines/DESIGNER-DIAMOND-Royale/Designer_Diamond_Royale_manual_ENG.pdf.aspx . The pop-up for the Machine needs to rest is shown on pages 4-26 and 8-14 (pages 74 and 123 of the PDF). The Designer Ruby Royale has the messages on pages 4-24 and 8-14 (70 and 116 of the PDF). The manual for this machine is here: http://www.husqvarnaviking.com/SiteMedia/Products/Machines/-%20DESIGNER%20RUBY%20Royale/Manual/Ruby_Royale-manual-EN.pdf .

I hope this helps. If the message comes up after a few minutes of sewing (under 5), I would recommend that you consider cleaning the bobbin area. Sometimes a flossing swab can help remove debris that has gotten into the corners below the bobbin. If that doesn't help, your machine may need to be serviced.

Cindy Wells

With most machines after you select the Zig Zag setting you then select the normal stitch knob that can be adjusted for long or short stitch lengths and that should also give you adjustment on your Zig Zag stitch length .

Contact your local Viking dealer. They will be able to tell you where the serial number is located.

Unfortunately, I don't know of any free sources of the manual. It is available here: http://www.sewingmanuals.com/Sewing_Machine_Manuals/Viking.htm . Scroll down to the 64th item in the list. You can also check with a Husqvarna Viking sewing machine dealer in your area.

I hope this helps.

Cindy Wells
(I know that many dealers can get the manual for you. I was able to get a manual for an older Bernina serger for a minimal fee a few years ago.)

Take off the covers to gain access to the innards of the machine and cut the thread away from the shaft.

I was unable to locate a free copy anywhere, but I did find an edition for a 750 edition for $10.00. I believe this does cover the 750 Series, which would include your machine. You should email the company selling the book first, though, to be certain.

This was the only site I found with any manual that was close. You might try giving a quick search on eBay. Oftentimes when someone's machine dies, they will sell the manual and any accessories they had on there. You might end up finding something.

Good luck!

You can find a similar manual from (http://safemanuals.com/user-guide-instructions-owner-manual/HUSQVARNA/VIKING%20190-_E).Hope you will be satisfied.All the best.