I was given a Durabrand TV awhile back and it didn't come with a remote control. Just lately I hooked it up to my cable. I realized that my cable wouldn't work with the TV, simply because it is stuck on AUX mode. Can I get out of AUX mode without a remote? I finally couldn't figure it out, so I bought a universal remote from RCA that should be compatible, but I have not been able to program it. Even with the device codes, nothing has worked for me. Hopefully someone out there knows.
You can program a Comcast remote to work with the TV. Press the "TV" button on the Comcast remote. Then, hold down the "Setup" button until the red light blinks 3 times. Enter a 5 digit code: These are the Durabrand codes: 10171 10463 10180 10178 11034 The 10171 code worked for my Durabrand DWT1905. Then use the TV/VCR button located beneath the "7" to switch inputs.
An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: Durabrand TV stuck on AUX mode
You can buy an original remote or a known usable substitute here:
If the RCA 'universal' (no such thing) remote code listing has any of the following brands listed, you should try these first since they are all made by Funai:
Funai, Symphonic, Sylvania, Emerson, Aventura, ESA, Magnavox, INSIGNIA, and Misakai
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Here are the codes for your GE TV: 645, 742, 763, 531, 676, or 690.I have provided the instructions to program the DISH remote to your GE TV:AddressRemote to TV
While at the device location (TV, etc), point the remote at the device. Press and hold the device button on the remote (TV, Aux, etc). - All four mode buttons should light up
Enter the three-digit remote control code - The mode button (TV, Aux, etc.)you selected should light up
Ifyou are programming a code into AUX Mode, you must do the following beforeentering the device code:Press 0 for a TV (if TV code is 500, enter 0500)Press 1 for a VCR/DVD (if DVD code is 617,enter 1617) Press 2 for any other device (if device codeis 639, enter 2639)
Press the Pound (#) button - The mode button you are programming should flash three times
Press the large, red POWER button - The device should turn off
I suggest to go back to the menu and make sure in the connection or signal type to select antenna.. Since you had it hooked up to cable it may not have been selected to go back to antenna. Hope this helps you out.
Hi, my name is Cheri Torres with DISH Network CustomerService. We do have a few codes that you can try in order to get your DISHremote to control your Durabrand TV functions. I will list here for youour best codes for our most popular remotes and also the instructions foraddressing your remote to your TV. You will be able to find the model number ofyour remote on the back of the remote at the top. For the 3.0, 3.1, 3.2 and 3.4IR remotes the best codes for Durabrand TVs are 220 and 233. For the 5.0, 5.2,5.3, 5.4 and 20.0 IR remotes the codes are 220, 221and 523. For the 4.0, 4.4,6.0, 6.2, 6.3, 6.4 and 21.0 IR/UHF remotes the best codes are 233, 220 and 720.I hope you find these codes and instructions useful and if you have any furtherquestions or concerns feel free to email me at Cheri.Torres@Dishnetwork.com. :)
Instructions for addressing remote to TV
Turn the Television On.
Press and Hold the TV Mode button until all the other mode lights (i.e. AUX, SAT etc.) light up.
Enter the three-digit code using the buttons on the number pad.
Press the pound(#) button. Note: The LED will flash three times.
Test functionality with the TV
Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.