Thomson 29DM400KH Model ETC 210 cod error 16?

Please be advised that the newer machines (Classic models) such as the 130-180 and up, have a totally different geometry. This is to say that the older machines have a shorter distance from the center of the presser bar to the needle center. The newer machine design was increased to provide space for needle threaders etc. Older machines will use an older Walking foot model (still available).

this is due to bad communication error, it can be reset by service cod 16 sub cod 01

Sounds like your drive has failed. Fit a new drive of the same size and format it with the utility in your digi box.

you can get a cheap universal remote for about 5 bucks. But if your tv doesnt have a menu button on the set itself then some tvs you have to push either the volume buttons up and down at the same time and the menu should pop up. or it could be the channel buttons

Sostituire la 24Wc08P con una nuova. Substitute 24WC08P with a new one. In this model it's very stressed and since it's a flash memory it has a limited number of writes. Ciao

get solution gestetner 5430 copy printer e-16 error code

I've successfully reset the plantronics explorer 210 by holding the big button on the outside (by the flashing light) down for 5-10 seconds. I wait until the light starts flashing red/blue instead of just blue.

Hi well, I would advise you to try the internet place the model etc on this media, and also try ebay,
worth a try some one may be able to help,
Cheers,
John

C03FF, is the improper or unmatched model setting code. go to "service mode" In service mode please select "ADJUST"
in "ADJUST" please select "Model Setting" in "Model Setting" select the cpm, (Copy speed) of your machine, for example if you have bizhub 210, then select "21" from the list. if you have bizhub 163 then select "16" from the list and press "yes" button. code will remove.

Go to the Seme Nedis website. They may be able to help.