When Heating the surface light is flickering light on kitchenaid microwave khhc2090sss but it heats normal. What causes this and is it unsafe?
If you're referring to the cavity light, it's possible the bulb is just loose in its socket. The cover has to be removed to access the bulb.
SOURCE: GE Over range microwave, JVM1660
Was it the magnetron. Ours just gave up the ghost(heat) yesterday.
SOURCE: Kitchenaid KHMS155LSS 1000 watt microwave makes grinding noise
Chances are you have a bad stirrer motor or the stirrer blade is jamming or loose on the motor shaft.
Your owner's manual should tell you how to remove the stirrer cover to check it.
If
for some reason you don't have your owner's manual, you can download it free here, as well as the parts manual for your model.
You can also find
helpful exploded view diagrams and order parts by entering your full
model number here.
We're
happy to help you with free advice and we'd appreciate your
thoughtful rating of our answer.
SOURCE: top of over-the-range microwave hot to touch; normal?
A little over 100F is hotter than most folks can stand to touch, so it may not be seriously hot.
But if you're concerned, you might see if your dealer will let you test another one or a similar model at the store to see if it also gets that hot.
Otherwise, you can return it to be safe or you can contact Panasonic consumer electronics support here or at 1-800-211-7262 to ask them about it.
We're
happy to help you with free advice and we'd appreciate your
thoughtful rating of our answer.
SOURCE: AC925EQK microwave. flashing light, not heating up
Mag tube Shot
Testimonial: "thanks very much"
Hi,
Here is a tip that will help you to figure out what is wrong with your Microwave Oven....
Basic
heatman101
[\[\[\[\[\[\[\[\[\[\[\[\
Hi,
Here is a tip that will help you to figure out what is wrong with your Microwave Oven....
Basic
heatman101
-\-\-\-\-\-\-\-\-\-\-\-\
954 views
Usually answered in minutes!
×