How much per lineal meter for 600mm high picket fencing

The high voltage output is a transient wave form ?
The fence would have a certain resistance
the voltmeter may not have the same resistance.
if the output energiser resistance is not matched by the volt meter's resistance then the maximum power transfer will not be achieved. If the fence resistance is matched to the energiser output resistance then maximum power transfer will occur.
https://en.wikipedia.org/wiki/Maximum_power_transfer_theorem
if a transisient wave form is generated the voltmeter won't read the AC voltage as it is not a sine wave .
The high voltage on the fence conductors may be present in the form of intermittent pulses of short duration, or as a continuous AC or DC voltage.
https://patents.google.com/patent/US7893521

What is the make and model?

a square meter is 1000 mm times 1000 mm = 1000000 sq mm
divide 843 by 1000000 =.R000843 per sq mm
now multiply 600 by 300= 180000 sq mm
now multiply 180000 by .000843 = R151.00
simple maths really

I am assuming you are talking about fencing in 3 sides of an area with each side being 25 feet long. Linear feet refers to only the running length of the fence. It doesn't care about height. For example, you fence will be 75 linear feet long...three sides each 25 feet. The price per linear foot already takes into account the fence height. For example, you say that the fence you want is about $15.00 per linear foot. For the sake of argument, say your fence is 4 feet high. If you were to change to a 3 foot high fence, the cost per linear foot would be less since there is less fencing material. If you wanted to up the height to 6 feet, the price would rise accordingly.

Here's a link to an article I wrote several years ago. It also includes a handy spreadsheet for getting the pickets spaced just right.



http://www.naturalhandyman.com/iip/inffence/infpicketfence/infpicketfence.html



good luck!

Few days back i had also facing this pool fencing broken problem due to heavy storm and rainfall.Then anyone suggest me about experienced contractors they give me quality services at affordable prices.They also provide pool safety certificate after full pool inspection.If you want to avail their services then i feel glad to provide a link here.You just go for it and see the difference. http://pool-safe-inspections.com.au/pool-fence-repairs/

We used paint sprayers every day for years.

Tips come in different sizes. With oil base paints we used the small tip like a 4-11. With latex we used bigger tips, like a 5-17. Really big spray rigs use 5-19. Tip size matters.

Another important thing is to strain the paint. The paint store sells 5-gallon-size strainers. Put the strainer over a 5-gallon bucket. Pour the paint into the bucket. Lift the strainer up, and finally grab it with your hands and squeeze the paint out. Do this in the grass and then wash out the strainer for next time. Put a lid over the paint bucket so the paint stays wet and clean.

We used high pressure sprayers, and then wrapped a filter right over the intake... but the tips would still clog. We had guns with reversible tips ... rotate the tip around, fire the gun, and the clog was gone.

Maybe your tip is getting clogged real fast. When that happens, the gun simply doesn't shoot. The old guns, we had to take them apart every time the tip clogged. I don't know about the tip on your gun.

Your paint sprayer is probably not very high pressure, which means it would clog easily if stuff was in the paint ... and latex is thick and sticky and it gets crusty as it dries.

Suggestion: I would ask Sherwin Williams about the tip. See if they sell parts or tips at the Home Depot or Sherwin Williams.

Also you can clean the gun out with lacquer thinner. See if the lacquer thinner will pass through the gun. I would take it apart and clean everything with a toothbrush, and soak it in lacquer thinner. It might work, but the home-depot-home-owner-spray-equipment is generally not made for more than a few jobs. Especially the wagner-diaphragm-type guns.

Something else you might consider for a cedar-type picket fence. A roller. Sherwin Williams sells thick shaggy roller covers that hold a lot of paint. The little cheap roller covers can't paint a fence or anything else because they're too thin. We almost never sprayed a fence. We'd put masonite along the bottom and then just threw paint up with a roller [slap it on as the customers used to claim] >>> for cedar pickets, thin the paint with water (1 gallon water per 5 of paint) so it flows into the holes and gaps. Roll the fence, and then go back and touch up with a brush or the sprayer. A paint job on a fence always looks better the next day [unlike some things] so sometimes it's best to wait 1 day before doing the brush work.

it should be 120% of your batt. voltage rating

Are you printing a serial or parallel barcode? If you don't know, a serial barcode looks like a ladder as it prints out on the label. A parallel barcode looks like a picket fence. A serial barcode (ladder) prints at 2.5 ips by default. You can't increase the speed. If you're printing a parallel barcode (picket fence) you must hit "enter' once you adjust the speed setting in the printer menu. If you've done that and it still won't increase speed, then the speed is set by the software itself, and overrides any changes you make in the printer menu. The speed adjustment must then be made in the software, not the printer.