Question about Computers & Internet

Open Question

There is face mode and regular mode but it is still face mode

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you set time/date?


Hi, do you have the MiniTuner module in the radio? You need that in, and the antenna connected facing the SW horizon. Turn on to SATellite. Adjust antenna so that you can hear Channel 1 clearly. After you hear channel 1, the satellite will send a time signal. Then go to MENU, select Adjust time and pick your time zone and if you are on Daylight Savings time. Then, menu to exit out. Your satellite signal will keep the time updated when in Satellite mode.
I don't know if that will also set the regular clock too, or just only the time while in satellite mode. Let me know how you do with it.

Aug 19, 2014 | Timex TMX1 Satellite Radio Receiver

1 Answer

Camera won't remain on


It's probably a lens related problem. Blow through the lens to remove any debris stuck inside. Or tap your camera repeatedly while the lens is facing the ground.

Aug 14, 2012 | HP Photosmart R927 Digital Camera

1 Answer

How to remove msi easy face logon


Shut down the laptop..restart in safe mode, once you are in safe mode, try to go to a restore point before the issues started...you should be able to clear this up...

7 ways to boot into Safe Mode in Windows 10 Digital Citizen

5 Ways To Boot Into Safe Mode In Windows 8 1

Need to Start Windows 7 in Safe Mode Here How

Aug 07, 2017 | MSI Wind U120-020US Netbook

1 Answer

I recently recieved an e-mail to indicate that I'd been accepted as a 'friend' by someone I neither know or made such a request to. In checking, I note that I'm listed as a friend on that person's site. I...


Face book structures provide resourcefulness to an extensive audience. In situation face book membership least attains an expedited resourcefulness has several factors. First assume that the resource structures either computer devices with networks requires means to attain resourcefulness. In situation where conditions least making networking attainable either as hardware software related makes participation unachievable on the network websites. Second, ascertain that face book membership comprises entities of an extensive audience either professions, educationist only mentionable examples. Persons that first attain membership on the network are least familiar with methods functionalities among mentionable factors to least regular navigation of website. For example, face book as social network provided the resourcefulness of interacting however requires familialirtion to the equipment devices to attain the response requested. Ascertaining the social categories of the entity members predicts the responses to regular social relations. Professional on the face book site least resort without matters that relate in expectations. The category of entity member would have requested to participate at a least frequent regularity on network. Face book is popular however with competitive sites makes participation at regular expectations least attainable. Once a member of network websites requires capturing the expectation either inviting entities from which an experience is attainable. In the situation with face book, ascertain that alternate means to communications makes social networking. For example, emailing, telephone, or text messaging are alternate available method available to recapture the network experiences.

Feb 25, 2011 | Facebook Social Network

1 Answer

I have a 'relaxed nature sounds lcd clock' with no instructions


Moderately difficult, but not impossible. ;) I picked up this clock @ second hand store with no instructions and was able to figure it out how to set it in about 15 minutes. I liked the calendar feature on the face and the LCD (as opposed to LED because I prefer my bedroom dark when I sleep).
When setting this clock, one of the keys is to pay attention to the the icons displayed on the face toward the lower left. Default "MODE" is time set. To set the time: Press "SET" followed by either "HOUR" or "MIN" while the display is flashing to increment the hours and the minutes to the correct time. As previously state, the default "MODE" is time set.
Pressing "MODE" one time accesses a secondary clock that you might use if you regularly travel to another time zone (new icon w/ 2 clocks appears). Setting the secondary clock uses the same method above.
Pressing "MODE" a second time accesses the first alarm setting (alarm clock icon starts flashing). Same method to set.
Pressing "MODE" a third time accesses the secondary alarm setting (second alarm clock icon appears and begins flashing). Same method to set.
Pressing "MODE" a fourth time accesses a timer (hourglass icon appears). Same method to set.
Pressing "MODE" a fifth time allows you to set the calendar (calendar year appears where the digital clock display was). Press "SET" to change the date: "HOUR" increments the month; "MIN" increments the day; "MODE" increments the year. Press "SET" again to exit.
Pressing "MODE" a sixth time returns to the default time set mode.
I hope this helps someone! God's blessings in Jesus Christ! ~Thomas

Mar 09, 2009 | Audio Players & Recorders

1 Answer

Color Display problem


it seems that problem that ur facing is manly related to drivers but try booting into safe mode and incase ur screen look normal in it try installing the driver from support.dell.com.or check in bios and check the screen in case ur screen is still bad then contact dell

Feb 03, 2009 | Dell Inspiron 1501 Notebook

2 Answers

Sportcraft Heart Rate Monitor Watch


On mine you press and hold the ST/FWD button.

Feb 01, 2009 | Casio G-Shock GW300CA-1V Wrist Watch

1 Answer

Hi     sir , i am an mba student and facing virus problem  when i am starting internet explorer message like dynamic.dll file cannot read is there i had an update version of avast profesional kindly...


Try starting your computer in safe mode and do a virus scan once in safe mode. While in safe mode Windows only loads the basic devices to run your computer and usually viruses are not loaded untill windows starts in regular mode. Don't panic once you are in safe mode and your screen looks all grainy, this is normal. 
  1. Restart your computer and press F8 as soon as you turn it on.
  2. Click the "safe mode with networking" option
  3. Update your antivirus
  4. Do a full system scan
  5. Restart your computer and hope for the best.
If that doesn't work, than reinstall windows.
If you need further assistance, let me know.

Jan 05, 2009 | Microsoft Dynamics CRM 3.0 Professional...

1 Answer

How to use face recognition on my toshiba l350 laptop


Normal 0 87dab65.jpgA growing number of digital cameras now include a Face Recognition mode. The camera detects faces in a scene and then automatically focuses (AF) and optimizes exposure (AE) and, if needed, flash output.
The technology can be effective when taking pictures of large groups, when a person is in the distance or when the subject moves into the frame. Even if a person moves, the camera will stay focused on it and adjust exposure. It is also effective when photographing people in bright light when the LCD is difficult to see.
Some digital cameras also have a tracking function that allows the user manually give priority to a single face. This comes in handy when taking photos in a crowd, at school plays and similar function.
Face the digital camera A person’s face must be facing towards the camera for Face Recognition AF/AE to work most effectively. Like so many digital camera features, it also works best when taking photos in good light.
Face Recognition, also known as Face Priority, is typically activated when switching a camera to portrait mode or a dedicated face-detecting shooting mode. Since the technology is hardware based, it is generally faster than manually composing and locking focus and exposure on a face.
A word of caution about using face detection It’s important to note that Face Detection (FD) may be associated with a multi-point autofocus mode, where the camera, not you, determines where to focus. When a face is not detected in a scene, the camera will revert to this mode.
Many photographers find multi-point autofocus mode to be inconsistent, if not unreliable. They use Single Area focus instead to have precise control of where the camera locks focus. They only switch to FD mode when photographing people.

Sep 06, 2008 | Computers & Internet

3 Answers

Compass wont work correctly


if your hands aren't straight when you use the compass try this to sync the hands.

1. Press and hold the middle button to enter T-Touch mode.
2. Press the centre area on the face twice to display 24hr/12hr
3. Press and hold the middle button to enter T-Touch mode untill screen says sync.The hands will face 1200.
4. Press either the upper (East) or lower (West) button to adjust the compass hands. They should both face 1200.
5. Press the middle button to get back to 'regular' compass mode. Note that your offset setting will still show in the digital area.

Oct 10, 2007 | Tissot T-Touch T33759851

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...