Car Audio & Video Logo

Related Topics:

James LeDoux Posted on Mar 30, 2017

Looking for a manul for a power acoustik apache series ap760

1 Related Answer

fkuk

fkuk

  • 311 Answers
  • Posted on May 18, 2010

SOURCE: LT-980/2 Car Audio Amplifier: Looking to see if I can hardwire a Power Acoustik ...

you want to use a car amplfier indoors in the house

yeah that can be done very easily
just wire it like you would inside a car but you need to purchase a 12v DC adapter
i would go for one with at least 3A output (the bigger the better it depends on how much u wanna spend) from personal expericance 1.5A works but when it gets loud the amp stops and restarts

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Trying to find out what resistors I need to get to replace the 2 that are bad in a Power Acoustik OVN1-2000D 2000W Max, Class D Monoblock Gothic Series Amplifier

Search google for a schematic should be able to find one. I repair amps. Marks Car Audio & Amp repair
e-mail skinnman33 @gmail.com I can be reached at 727-266-6398 Let me know
0helpful
1answer

Power Acoustik amp

First thing to do is check the fuse. If it is still in good condition then you may have blown your amp

You can make sure no wires are touching an also tried wiring in a mode that does not put it at its maximum ohm load.
0helpful
1answer

How to install a power acoustik 30th anniversary version series 4 channel 1200 watt amplifier

Power to battery. Ground to something in trunk. Remote to blue lead on radio. Rca to line or sub out on radio.
0helpful
1answer

Need a installation manual

Here is a link to Power Acoustik support page:http://www.poweracoustik.com/pa2006/OWNER_MANUAL.htm#current pd From the Amplifier drop down list, select "Lightning Series 03-07" or let me know your email and ill send you the PDF myself.
dreamsystems
0helpful
1answer

I need a manual for a power acoustik ptid4007

i looked the manule for that is not posted on their home site sory but u may have to do without
1helpful
1answer

LT-980/2 Car Audio Amplifier: Looking to see if I can hardwire a Power Acoustik ...

you want to use a car amplfier indoors in the house

yeah that can be done very easily
just wire it like you would inside a car but you need to purchase a 12v DC adapter
i would go for one with at least 3A output (the bigger the better it depends on how much u wanna spend) from personal expericance 1.5A works but when it gets loud the amp stops and restarts
1helpful
1answer

Power acoustik gothic OV2 800 manual

Could not get a manual for you but did get the follwing specs. Hope they help.

Power Acoustik Ov2-800 2-Channel Class A/B Gothic Series Amplifier (800-Watt)
POWER ACOUSTIK OV2-800 2-CHANNEL CLASS A/B GOTHIC SERIES AMPLIFIER

800-WATT 2-CHANNEL
4 ohm RMS: 150W X 2
2 ohm RMS: 180W X 2
Bridged mode MONO RMS: 360W
BRIDGED MAX: 800W
FULL MOSFET POWER SUPPLY
PWM CIRCUITRY
FULL SELECTABLE CROSSOVER
3-WAY PROTECTION CIRCUIT
TRI-MODE CAPABLE
VARIABLE LOW PASS 40 HZ - 120 HZ
VARIABLE HIGH PASS 150 HZ - 1.5 KHZ
VARIABLE 18 DB BASS BOOST @ 40 HZ
FREQ RESP: 10 HZ TO 30 KHZ
S/N RATIO: 98 DB
THD: 0.02%
2 ohm STABLE STEREO
SYSTEM DISTRESS INDICATOR
HIGH/LOW LEVEL INPUTS WITH FLOATING GROUND
4-GAUGE POWER/GROUND CONNECTION
PLATINUM RCA CONNECTORS
LINE OUTPUT WITH FLOATING GROUND

BLUE LED
CHROME TOP PLATE PANEL 2-CHANNEL CLASS A/B GOTHIC SERIES AMPLIFIER (800-WATT)
0helpful
1answer

How do i wire two 15 inch subs to 2 ohms

Hello familia_gome,

Those MOFO-15's have dual 1ω voice coils. So the only way you can get 2 of them to present a 2ω load is to use 1 voice coil on each one with the two of them wired in series. Using both voice coils, you can get a 1/4ω load by wiring the voice coils in parallel and then wiring the subs themselves in parallel. You'll get a 1ω load with the voice coils in series and then parallel the subs. Or you'll get a 4ω load with both the voice coils and the subs in series.

Here's a link to Power Acoustik's PDF for the MOFO's. I recommend that you check out the wiring diagrams on page 3.

http://www.poweracoustik.com/SUPPORT/MANUALS/PA-MOFOWoofer.pdf

Hope this helps.
0helpful
1answer

My amp goes in protect mode

Maybe the audio amplifier IC´s are damaged
Not finding what you are looking for?

91 views

Ask a Question

Usually answered in minutes!

Top Power Acoustik Car Audio & Video Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Power Acoustik Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...