Do you have a replacement Canopy for 10 X 12 Style #5LGZ6530-5-200 R or 200 B I assume there both the same. Because there are the same instructions.

This is probably close enough.

https://bobs-ui.s3.amazonaws.com/Sutton/SUTTON+QUEEN+CANOPY+BED_ALL+COLORS.pdf

https://www.google.com/search?q=dumont+king+canopy+bed+instructions

..

You can find just about any canopy set up instruction manual at the the link below. They can all be downloaded. Good Luck! Product Manuals Caravan Canopy

Most likely need to contact manufacture of fan. What make/model of fan do you have?

A canopy (or four-poster) bed is a more dramatic and formal style of bed. It has tall posts on all four corners that support a covering providing the user with a private enclosure that can be drawn back. Here is an example of what a traditional canopy bed looks like -

Maybe you find a tutorial here


Palm Springs 10 30 Foot White Party Tent Gazebo Canopy wi


Palm Springs 10 30 Foot White Party Tent Gazebo Canopy with Sidewalls


Palm Springs 10 20 Pop up WHITE Canopy 6 Side Walls EZ to set up


Palm Springs 10 20 Heavy Duty Polyester Striped Party Tent Gazebo with...



If not enought, you can find more at Youtube

Use the hardware that comes with the Disney Princess canopy package to install the main canopy hook in your ceiling. Center the steel ceiling hook above the center of the twin bed and screw it into the ceiling by hand or with pliers. 2 Follow the included instructions and insert the four poles into the sleeves of the canopy. The two longer poles will run lengthwise above the bed, while the two shorter pieces will run widthwise above the bed. 3 Attach the canopy to the ceiling hook by slipping the plastic ring of the canopy onto the hook. The four polyester sides of the canopy should now hang over the twin bed. 4 Use the customer support form through the Exxel Outdoors website if you have questions regarding your Disney Princess canopy.

I got this from the manual. I attached pictures from the old and new model for the peg peregeo Viagggio. Once the canopy is off you should be able to remove the fabric, just make sure to use the care instructions if you are going to wash it.

Good Luck from Moms Just Know

The canopy should just push onto the seat frame, they do need a bit of pushing though. its easier if you get the connector half on and then just push, will hear a popping sound. it took me a while to figure it out on mine and the instructions aren't the best.

1. Infant restraint comes with four identical canopy support parts. Thread one canopy support completely through one sewn tunnel.
2. Slide straight end of a second support into the straight end of the first support.
3. On models with four canopy supports, repeat steps one and two for the other canopy tunnel.
4. Attach canopy in the areas between the infant restraint and the handle base.
To remove canopy, reverse the steps.

http://www.gracobaby.com/assets/pdfs/instructions/ISPC089BA_ISPC106AA.pdf

Hope this helps!! Thanks