How do I fix error UO1

It sounds like the power is dropping along the 15 foot length of the cable. You could try connecting a power supply to the cradle and should not hear those beeps any more. The part number of the power supply is PWRS-14000-253R. All of this assumes you are using the STB4278 or CR0078-SC cradle to connect. If you have a CR0078-P cradle it needs a different power supply.

This error code tell you the safety thermostat is not working. This part is on the top of element cover. Replace new one.

Hi what does an F16 Error mean?

d12-100 box does not have an hdmi port what it does have is a problem the signal level coming out of the box is to high install a 4 way splitter between the box and the tv line out of the box to the in of the splitter any port out of the splitter to the tv the problem you are having is called ghosting

Hi,
If you look inside the battery compartment or on the spec label (usually on the back) it should have a diagram or tell you. Usually it's 4x C size/type batteries.

Try the Flipper.  Its a simple remote control that does what you are looking for.

Well if they were cheap then they were made in china, they fail prematurly due to cheap parts and poor build quality. CD's dont make Cd players break down unless they are caked in dust or are damaged.

http://www.patersontech.com/products/usbtvtranslator.aspx

buy the adapter, i had to do the same.

After digging around for awhile, the only onfo I could gather was that teh D12 uses the same codes as the D10 & D11, but could not get those codes, I am still looking around and will post any other info I may aquire. I would also suggest re-trying any codes for echostar. I can tell you this as I sell that equipment in my market and echostar provides the equipment and support for techs, installers, and retailers. Anyway Good Luck for now

The part# for Q308 is KRA102MTA I have the service manual if you want it