Touchpad on Packard Bell Easynote not responding

It would help if you gave us the Model, but see this... http://www.experts123.com/q/how-do-enable-the-touchpad-on-my-packard-bell-easynote-lj61-series.html

You should go to service to check if the led is still ok or needs to be changed.

Try a cold-start, unplug, removebattery, leave out,plug in boot normally. If that fails restore to a date before this issue. Reinstall drivers if necessary. http://www.packardbell.co.uk/pb/en/GB/content/download

just reinstall your laptop mouse driver by using Externel Mouse USb Mouse...

Check this:
Many laptops with touchpads have a switch or a keyboard combo that will disable the touchpad. Look to see if there is a little button you can push located near the touchpad. Alternately, there is normally a Fn-special function key combination you can use. You press the Fn key and also the special function key that has a little symbol on it that looks like a touchpad. That can turn the touchpad on or off.

there are a few button over the keyboard, one of them is the switch of you touchpad mouse.

If the led of the touchpad mouse button is on, then the touchpad is unlocked.
And viceverse.

Good Luck. Remember to rate my answer.

packard bell easynote nj65 touchpad notworking

could be malware infection but before, open and check that touchpad to motherboard interface flex is ok and well plugged in the socket. also uninstall all touchpad drivers, run a malware removal tool then, scan for new hardware..
Regards

Pressing F6 on your laptop will disable the touch pad or one of the F keys that has a picture of a finger.

Have you tried it with a USB mouse?